Rigging Accessories
-
90° Chrome Plated Plastic Thru-Hull Fitting
- Chrome plated poly material
- A dim = 1-7/8"
- B dim = 3-1/2"
- C dim = 1-1/8"
- D dim = 1-1/8"
- E dim = 1-3/8"
-
1" Hole Snap Handle Drain Plugs
Out of stock- Fits 1" hole
- Stamped Brass Handle
- Always check plug before launching boat
- Fits Berkeley transom housings with 1" hole
-
600 GPH Bilge Pumps
Out of stock- No moving parts for activation
- Simple 3-wire design for eady installation. Wire leads are 30" long)
- Includes a check valve that can be installed to prevent bilge pump back flow
- 600 GPH at 0'; 500 GPH at 3'; 350 GPH at 6' open flow head
- Rugged plastic fuel resistant housing
- Draws 2.5A @ 12VDC
- Uses 3/4" hose
- Motor shaft is stainless steel
- 5 AMP fuse
- 4-1/8" H x 3-1/4" W x 5.75" L
Includes:
Bilge pump
Straight and 90° smooth elbow discharge ports
Instructions
-
Water Pressure Bypass Regulator / Relief Valve — 3/4 NPT Main Body with 1/2 NPT Fittings
Includes:
- 1 — Main Body (3/4 NPT)
- 1 —Straight Fitting (1/2 NPT)
- 1 — T-Fitting (1/2 NPT)
- 1 — 90° Fitting (NPT)
- 1 — Reducing Fitting (NPT)
All components are made of brass
-
Fuel Selector Valves — 3-Way [3/8" NPT]
- Three way fuel selector valves
- 3/8" NPT size
-
C02 Control Panel for Reverse and Long Horn Buckets
Out of stockPush button activated steering wheel controlled C02 solenoid valve fits Ram Horn Reverse Buckets, Long Horn Neutral Buckets, and can be modified to fit Place Diverters (also can fit American Turbine Diverters)
Kit includes:
- Push button steering wheel control
- C02 solenoid valve
- Relay assembly
- 15' wiring harness
- Attached to mounting plate
-
Fuel Hose — 3/8" ID
Out of stock- 3/8" ID fuel hose
- Price is per Foot
- Enter the # of feet in the quantity field
-
Turnbuckles for 3/8" Cavitation Bosses
- Made of stainless steel
- Adjustable from 8-3/4" to 10-3/4"
- Fits 3/8" Cavitation Bosses. See related items below
-
Pins and Clips for 3/8" Cavitation Bosses
Out of stock- Made of stainless steel
- Includes 1 pin and 2 e-style clips
- Fits 3/8" Cavitation Bosses. See related items below
-
-
Garboard Drain Plugs
•High polished 316 stainless steel reduces corrosion
•Threaded removable plug
• Retention system keeps plug from getting lost
• Large 7/8" hole
-
Hatch Hinges
Out of stock• Chrome plated brass
• 2-3/8" x 2-7/8" x 1-1/4"
• Uses #10 screws (not included)
• Includes cotter pin
• Sold per Each
-
Take-Apart Hatch Hinges
Out of stock• Removable feature allows motor box to be pulled apart for engine access
• 3-5/16" x 2-1/8"
• Uses #10 screws (not included)
• Sold per Each (2 halves = 1 each)
-
Universal Safety Racing Kill Switches — Fits Magneto and Ignition
- Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill
For Battery Ignition Systems (points or electronic)
- When the lanyard is pulled circuit is broken (open)
For Magneto Type Ignition Systems
- When the lanyard is pulled off goes to ground
WARNING: Test switch for proper function before each use. Replace lanyard if worn, cut or frayed.
-
Replacement Lanyard for Universal Safety Racing Kill Switch
Out of stock- Replacement Lanyard for Universal Safety Racing Kill Switch Replacement Lanyards
WARNING: Test switch for proper function before each use. Replace lanyard if worn, cut or frayed.
-
Side Mount Jet Boat Dual Function Control Handle
1 left in stockThese controls feature superior styling, a compact design, positive lockout with a smooth feel, allowing for precise throttle control.
• Single lever dual action design for jet boat applications — one lever to control both shift and throttle functions
• Side mount application
• Flush mount design for quick, tidy installation
• Waterproof neutral safety switch
• Weatherproof exterior, rugged diecast frame
• Can be used 33C cables
-
-
Fresh Water Flush Kit
Includes:
- Water Flush fitting with Check valve
- Waterline
- Clamps
- Tee fitting
-
1-1/2 lb Sea Goin' Epoxy Kits
Sea Goin’ Poxy Putty “Great for repairing Jet drive intakes” in jet boats. or filling holes in stringers transoms or holes in hull. If you need to set an intake see our 3-lb epoxy kits.
- Will dry under water!!
- Extra thick formula cures hard as a rock.
- Can be easily sanded, drilled, tapped, machined and painted.
- Bonds to just about anything except PTFE (Teflon®) and PVC.
- Almost ZERO shrinkage and is resistant to acids, alkalines, fuels, oils, etc.
- 1-1/2-lb. (24-oz kit)
-
1/4" NPT to 1/2" NPT Brass Bushing Thread Adapter
- Threaded adapter for 1/4" NPT by 1/2" NPT
- Made of Brass
-
Reverse Rotation Top Mount Chevy Starter with 3-Bolt Holes
Out of stockThis Heavy duty inboard starter fits most jetboats. The reverse rotation starter turns counter clockwise. It's a top mount rear entry starter that has a 3-bolt mount.
Starter has a 12-volt connection.
Looking @ the Flywheel from the rear of the engine "CCW" rotation
Reverse Rotation Top Mount Chevy Starter with 3-Bolt Holes
This item is brand new and not a rebuild.
-
11 tooth Gear Reduction Inboard Starter with 2 Bolt Holes
- Staggered bolt pattern bottom mount
- Gear reduction inboard starter
- Used on GM Engines with 14 in. flywheel
- Delco permanent magnet gear reduction
- 2 bolt starter
- 12 volt
- 11 tooth
-
Stainless Steel Thru Transom Water Dump Fittings -10
Out of stock- -10 AN
- Highly polished stainless steel
-
Reverse Rotation Ford Starters with 2-Bolt Holes
This heavy duty gear-reduction high torque starter fits most jetboats. The reverse rotation starter turns counter clockwise. It's a top mount rear entry starter that has a 2-bolt mount.
Starter has a 12-volt connection.
Reverse Rotation Top Mount Ford Starter bellhousing mount with 2-Bolt Holes
This item is brand new and not a rebuild.
-
Reverse Rotation Chevy Starters with 2-Bolt Holes
Out of stockThis heavy duty gear-reduction high torque starter fits most jetboats. The reverse rotation starter turns counter clockwise. It's a top mount rear entry starter that has a 2-bolt mount.
Starter has a 12-volt connection.
Reverse Rotation Top Mount Chevy Starter bellhousing mount with 2-Bolt Holes
This item is brand new and not a rebuild.
-
Reverse Rotation Chevy Starters with 3-Bolt Holes
Out of stockThis heavy duty gear-reduction high torque starter fits most jetboats. The reverse rotation starter turns counter clockwise. It's a top mount rear entry starter that has a 3-bolt mount.
Starter has a 12-volt connection.
Reverse Rotation Top Mount Chevy Starter bellhousing mount with 3-Bolt Holes
This item is brand new and not a rebuild.
-
97 Decibel Alarm
Alarm is 97 decibels
Base is 4"long with 3-1/4" center on center mounting holes
Base is approx 1-3/4" wide
-
Oil Pressure Sender
Oil Pressure Sender
0-100 psi range
Includes mounting hardware:
1 Washer
1 Lock washer
1 Nut
-
Fuel Pressure Sender
Oil Pressure Sender
0-15 psi range
-
Teleflex Helm Wedges
These Helm wedges allow you to angle your steering helm. Kit includes Two 10' Wedges & Bolts.
-
Side Mount Shift Control Handles — Morse
Out of stock- Heavy duty chrome finish
- This control has a single-function lever that moves one cable only
- Fits 3300/33C or 4300/43C type control cables
- For single-station use only and are not suitable for use with Mercury® and OMC® OEM type control cables. Durable heavy chrome finish
-
Control Handles
Made from Billet Aluminum and are available Black anodized. Acts as Jet Drive Shifter when foot throttle is used.
-
Foot Throttles — Stringer Mount
Fabricated Push Style Foot Throttle.
Made of aluminum.
-
Foot Rests — Stringer Mount
Light weight foot rest, this mounts to your stringer. Great for center steer drag boats.
Made of billet aluminum.
-
Foot Throttles — Stringer Mount
Out of stockLight weight foot rest, this mounts to your stringer. Great for center steer drag boats.
Made of billet aluminum.
-
Foot Throttles — Floor Mount
Cast aluminum Foot throttle with built in return spring.
-
Foot Throttles — Stringer Mount
Foot throttle with built in return spring.
Made of cast aluminum.
-
Deck Tach Mounts — Fits 3-3/8" Dia. Tachometers
Out of stockMounts on deck or cowling for easy visibility of tachometer
- Accommodates 3-3/8" Dia. tachometers
- Polished cast aluminum
- Glenwood
-
Deck Tach Mounts — Fits 2-1/16" Dia. Tachometers
Matches the deck tachometer mount
- Accommodates 2-1/16" Dia. gauges and tachometers
- Polished cast aluminum
- Glenwood
-
Garboard Drain Plugs
1 left in stockA neat, efficient fitting designed for drain or washout plugs
•Chrome plated brass
• 2" OD
• Fits 1/2" pipe
• Mounts with #8 screws
-
Automatic Bilge Drains
Out of stockAutomatically allows water to exit your boat while under way. Closes with water pressure when stopped. Plug measures 2" X 2".
-
500 GPH Bilge Pumps
1 left in stockIdeal for general purpose use. Features low amp draw, Miniaturized to fit in restricted areas, permanent magnet motor, stainless steel shaft, Measures 3-1/2" high, 2-1/4" wide. Pumps 500 gallons an hour.
-
Stainless Steel Thru Transom Water Dump Fittings
2 left in stock- -8 AN Can be used with 5/8" rubber hose
- Highly polished stainless steel
-
Battery Boxes
Out of stockBlack molded high density polyethylene, protects battery and area around battery from acid spills. Lid is designed to allow easy access around battery cables and wires. Complete with hold down strap and mounting hardware.
2206 Fits 24 Series: 10.5"L x7.25"W x 10"H
-
-
Gas Fill — Flip Top (Aluminum)
Gas fill is designed to be connected to the tank with 2” I.D. Hose. The cap has a quick release spring and a leak proof filler.
Constructed of cast Aluminum.
Sold per each
-
Gas Fill — Flip Top (Stainless Steel)
- Gas fill is designed to be connected to the tank with 2” I.D. Hose
- The cap has a quick release spring and a leak proof filler
- Stainless steel construction
- Sold per each
-
90° Fuel Vent — Flush Mount
- 316 Stainless,
- Flush mount cap
- 5/8"Hose size
- 7/8" Max Hull thickness
-
Fuel Vent
- Provides venting for gas tanks
- Made of stainless steel
- Fits 3/8" ID hose
-
Fuel Selector Valves — 3-Way
Three way fuel selector valves
-
-
Fuel Selector Valves — 4-Way
Out of stock- 4-Way Fuel Selector Valve for fuel or water
- Four Positions: Tank-1, Tank-2, Tanks 1 & 2, Off
- Audible "click" at each handle position
- For thru panel mounting.
- Full 1/2" flow with 4 1/2" NPT Full Flow
-
In-line Bilge Blowers
Out of stock- Housing is molded of tough ABS plastic.
- 3" Intake
- 3" Exhaust
- Rugged built-in mounting brackets for easy installation
- Molded tabs on all hose flanges provide positive hose connections
- 8" length x 4-3/4" mounted height
- CFM 170 air movement
- 12V DC, 4.0A
- Use 6A fuse
-
3 lb Sea Goin' Epoxy Kits
- Sea Goin’ Poxy Putty “Great for setting Jet drive intake” in jet boats. or filling holes in stringers transoms or holes in hull.
- Will dry under water!!
- Extra thick formula cures hard as a rock.
- Can be easily sanded, drilled, tapped, machined and painted.
- Bonds to just about anything except PTFE (Teflon®) and PVC.
- Almost ZERO shrinkage and is resistant to acids, alkalines, fuels, oils, etc.
- 3-lb. (one quart kit)
- Some Jet Boats require 2 kits to properly set intake
-
U-Type Bow Eyes
- Made of stainless steel
- Bow eyes / Transom hold downs with 3/8"-16 thread
- 1-7/16" Center to Center
- 5" Overall Length with 3-3/8" thread Length
-
Bow Lights — Screw Mount
Out of stock- One Mile visibility
- 2-3/4" lg X 1-3/8" ht X 2-1/2" base width
- Chrome Diecast housing
- Red and green color
- Deck mount
- Screws are not included
-
-
Transom Lights — Screw Mount
- 3" Dia.
- Under dash for cockpit lighting
- Clear Lens
- Screws not included
-
-
United States Flag Kit
Kit contains:
- Print dyed nylon 12" X 18" U.S. Flag
- Chromed brass pole socket
- Varnished mahogany 8" flag pole
-
Water Pressure Bypass Regulator / Relief Valve Kit — 3/4 NPT Main Body with 1/2 NPT Fittings, and Accessories
These bypass kits are designed to prevent blown head gaskets or leaking head gaskets particularly in JET boats
- Allows you to add up to 20° degrees to your operating temperature
- Maintains full water flow to engine, bypassing to a thru-transom fitting if pressure becomes excessive due to high RPM
- Mount the pressure gauge on the block to monitor water pressure in motor
- A good recommendation for pressure would be nothing over 15psi @ w.o.t.
- Includes 3' of hose for bypass water
-
Water Pressure Bypass Regulator / Relief Valve Kit with Flush — 3/4 NPT Main Body with 1/2 NPT Fittings, and Accessories with Flush
- This bypass kit is designed to prevent blown head gaskets or leaking head gaskets particulary in JET boats.
- Allows you to add up to 20° degrees to your operating temperature.
- Maintains full water flow to engine, bypassing to a thru-transom fitting if pressure becomes excessive due to high RPM.
- Mount the pressure gauge on the block to monitor water pressure in motor.
- A good recommendation for pressure would be nothing over 15psi @ w.o.t.
- Includes a bulkhead garden hose flush fitting.
- Inlcudes a ball valve
- Includes a one-way bypass valve
- Great for use in salt water.
- Hose for bypass and flush side are side included
-
Engine Flush Fittings
- Allows you to permanently mount a female hose adapter fitting anywhere
- Chrome-plated Brass
- Uses #8 flat head screws
- 1/2" FIPT x 3/4" F
-
Battery Terminal Covers
- Satisfies U.S. Coast Guard requirements
- Fit most marine batteries
- Made of PVC
-
Brass Ignition Starter Switches
- All Brass
- Three position OFF / IGNITION / START
- Returns automatically from start to ignition position
- Furnished with chrome plated brass face nut, brass lock nut and stainless steel springs
- 13/16" dia. x 1-5/16" length mounting bushing
- 1-1/4" overall dia. x 2-1/2" overall
- Accommodates 1" panel
-
Heavy Duty Push-Pull Switch
- Heavy duty chrome plated brass face nut, washer and back-up nut
- Chrome plated plastic knob stainless steel springs
- Mounting stem: 1-1/4"L (3.18cm) x 3/8" dia (.95cm)
- Position: Off - On
- Circuits: 1 rated: 25A @ 6V DC - 15A @12V DC
- Fits panel up to 1"
-
Weather-Proof Push-Pull Switch
- Normally OFF S.P.S.T.
- Non-corrosive construction
- Plasticized body sealed against moisture and dirt
- Two 18 gauge insulated 12" lg. copper wire leads
- Chrome plated brass knob and face nut
- Mounting stem: 1-1/4"L (3.18cm) x 3/8" dia.
- Position: Off - On
- Rated: 6V-36V DC
- Fits panel up to 5/8"
-
Push Button Starter Switches
- Weatherproof
- Dustproof with protective neoprene cap
- Rated 35 amps at 12 volts
-
Single Push Button Switches with Cord
- Push button momentary switch
- Coiled cord