Performance Machining and Installation Services
All of our machining, blueprinting, and modifications are done in house by our Machinists with over 20 years of experience in the industry. Your items are not sent out to a 3rd party.
-
Choose number of holes to drill and tap in the drop down box below:
- Bowl to Suction End — 1/2"-13 holes
- Helicoils are a separate charge
-
Send us your shaft and we will machine it for a repair sleeve inducer
Price above includes:
- Machining of your shaft
Return shipping charges for your shaft will be added at checkout
We also have repair sleeves.
-
Send us your old Dominator suction housing and we will machine it for a Berkeley size seal.
Price above includes:
- Machining of your suction housing (Does not include a wear ring)
Return shipping charges for your suction housing will be added at checkout
-
Send us your suction housing and pop-off valve and we will machine the suction housing so you can attach the pop-off valve to the suction housing
Price above includes:
- Machining of your suction housing (Does not include installation or any hardware)
Return shipping charges for your suction housing and pop-off valve will be added at checkout
-
- We reinstall your jet pump
- This does not include rebuilding the jet pump or removing the engine, and/or intake
- Price is depending on actual labor and materials required
-
Install Ride plate and adjust angles
- Price is depending on actual labor and materials required
- Call us at 815-942-2600 for details
-
Send us your suction housing and bearing cap. We will drill, tap and counterbore 4 holes in the bearing cap and drill and tap 4 holse in the suction housing to make it double drilled.
8 holes are being bored.
Return shipping charges for your suction housing will be added at checkout
-
Send us your Berkeley bowl and we will machine it to fit a Dominator Style Impeller.
Price above includes:
- Machining of your bowl
Return shipping charges of your bowl will be added at checkout
-
Drill and Tap Bowl for Prime-A-Jet
Prime-A-Jet is Sold Separately
-
Send us your Straight Snoot and we will drill holes to make it double drilled
- Straight Snoot — We will add (8) 5/16" holes with a counterbore
Return shipping charges for your droop snoot will be added at checkout
-
Drill and Tap 3 holes in Suction housing for Pressure Gauges
1/8 NPT thread
Pressue gauges are sold separately
-
Send us your impeller and we will balance it for you
Price above includes:
- Balance impeller
Return shipping charges for your impeller added at checkout
-
Send us your Impeller and we will cut it down to the size
Price above includes:
- Cutting down impeller to the size you choose in the drop down box below
Return shipping charges for your shaft will be added at checkout
-
Send us your impeller and we blueprint it. (Optional impeller trim is also available)
Blueprinting produces solid water out of the exit nozzle rather than air bubbles which creates more thrust.
- Blueprint stage 1 — Inlet side of impeller
- Blueprint stage 2 — Inlet and exit sides of impeller
Impeller Selection Chart
Price above includes:
- Blueprinting of your impeller — Use drop down boxes to chose Impeller Material / Stage 1 or Stage 2 blueprint
Return shipping charges for your shaft will be added at checkout
-
Send us your bowl and we will blueprint it.
Blueprinting produces solid water out of the exit nozzle rather than air bubbles which creates more thrust.
- Blueprint stage 1 — Front side of bowl
- Blueprint stage 2 — Font and exit sides of bowl
Price above includes:
- Blueprinting of your bowl — Use drop down boxes to chose Impeller Stage 1 or Stage 2 blueprint
Return shipping charges for your shaft will be added at checkout
-
- The Best blueprinting money can buy for the quickest ET's
- Race track proven
- Helps the hole shot
- Keeps your pump hooked up under extreme conditions
- Blueprinting is available in two choices
-Standard Blueprint - Knife edge and weed cut outer diameter
-Extreme Blueprint - Knife edge and weed cut outer diameter, overlap is precision tuned
-
-
Send us your Droop Snoot and we will drill holes to make it double drilled:
- Droop Snoot — We wil add (8) 5/16" holes
Return shipping charges for your droop snoot will be added at checkout
-
Send us your bowl and we will drill and tap holes for a yoke
Choose which end you would like machined in the drop down box below:
- (2) 5/16"-18 drilled and tapped holes
Return shipping charges for your bowl will be added at checkout
-
Send us your bowl and we will drill and tap holes to make it double drilled
Choose which end you would like machined in the drop down box below:
- Suction End — We will add (8) 1/2"-13 holes
- Nozzle End — We wil add (8) 5/16"-18 holes
- Both Ends (Suction and Nozzle_ — We will add a total of 16 holes. (8) 1/2"-13 holes and (8) 5/16"-18 holes
Return shipping charges for your bowl will be added at checkout
-
- 1 year warranty on parts and labor
- Factory Trained & Certified Rebuilding service for Berkeley, Dominator, American Turbine, Aggressor, Legend. Jacuzzi Pump prices vary - please call for quote.
- We only use genuine Berkeley / American Turbine parts and bring them back to stock specifications.
- We disassemble, clean, inspect all parts, check shaft for runout and machine parts as necessary for proper fit and clearance.
- Impeller and pump is precision assembled using all new parts listed below:
Bearing cap gasket, bearing cap seal, bearing snap ring, bowl bearings (2), bowl gasket, bowl o-ring, bowl seal, graphite rope packing rings (5), hand hole cover o-ring, impeller nut, insulator, nozzle housing gasket, nozzle o-ring - PTFE, nyliner bearings (4), suction housing shaft seal, suction housing to intake gasket, economy thrust bearing (bearing upgrades available), transom gasket, non-shouldered stainless steel wear ring (wear ring upgrades available)
When sending the pump in, we suggest you insure the pump for complete new replacement value. If you are unsure what this is call, email or text us (815)-942-2600.
If you want to calculate approximate return shipping charges (add the item to you cart enter your city and zip code at check out. Insurance is not included and we usually insure for $6,000 in case UPS loses or damages the jet pump.
Please call, email or text to let us know the pump is coming.
Our shipping address is:
ARS Marine Inc
48W931 Wheeler Road
Big Rock, IL 60511
(815) 942-2600
-
Install Adapt-a-Shoe and Ride plate or Adapt-a-Shoe and Triplex Ride Plate
- Price is depending on actual labor and materials required
- Call us at 815-942-2600 for details
-
Price above includes:
- Drilling and tapping four - 5/16"-18 holes
- Installing ratchet/jetaway on to pump
Note: The price below is only for pumps being rebuilt at our shop. Call us if you would like a quote.
See Ratchet/Jetaway if you would like to purchase one
-
Install Place Diverter or American Turbine Diverter.
- Price is depending on actual labor and materials required
- Call us at 815-942-2600 for details
-
Send us your bowl and we will machine it for a stuffer plate and install the stuffer plate
Price above includes:
- Bowl stuffer plate
- Machining of your bowl
Return shipping charges of your bowl will be added at checkout
-
Machining the bowl for an o-ring groove will tighten up the clearance between the back of the impeller and the stuffer plate. No need to worry about a gasket failiing.
-
Send us your 3/4" skirt impeller and we will machine to fit a 1" skirt wear ring
Price above includes:
- Inner and outter hub of impeller cut down
Return shipping charges for your imepller will be added at checkout
-
Machining of intake for a shoe:
- Shoe pad is area is machined flat
- Drill and tap 7 mounting holes
-
Don't want to take you shaft out of the boat?? Try the easy install inducer.
Send us your impeller and we will machine it for an Easy Install inducer which is sold separately.
Price above includes:
- Machining of your impeller for an easy install inducer
Return shipping charges for your impeller will be added at checkout (insurance for impeller is separate charge and is not included in this calcualtion.
We also have easy install inducers and impellers
-
Open exit side of bowl pricing depends on model and year of bowl. Please call us at 815-942-2600.
-
Send us your Place Diverter nozzle end housing and we we will machine it for a FTN Nozzle Insert
Price above includes:
- Machining of your Place Diverter nozzle end housing
FTN insert is not included. Choose your FTN nozzle insert with this link.
Return shipping charges for yourplace diverter will be added at checkout
-
Send us your shaft and we will machine it for an inducer
Price above includes:
- Machining of your shaft
Return shipping charges for your shaft will be added at checkout
We also have shafts, HM inducers, billet inducers and bearings available or you can design your own package.
-
Machine Transom Housing for Dominator Size Bow
-
Assemble nozzle end to ball end place diverter.
Does not include pins or other parts, assembly only.
-
- Price is depending on actual labor and materials required
- Call us for details
-
We disassemble the Place Diverter, clean, inspect, and replace the following parts:
- (4) Nyliners — Standard length
- (2) Nyiners — Short length
- PTFE O-ring
- Double PTFE seal
If you want to calculate approximate return shipping charges add the item to you cart enter your city and zip code.
-
Send us your shaft and bearing, or buy one of our bearings and we will press the bearing on the shaft
Price above includes:
- Press Bearing on Shaft
Return shipping charges for your shaft will be added at checkout
We also have shafts, HM inducers, billet inducers and bearings available or you can design your own package.
-
Send us your bowl, bushings, and seals, or buy our bushings and seals and we will install the bushings and seals in the bowolt
Price above includes:
- Press bushings in bowl
- Install seals
Return shipping charges for your bowl will be added at checkout
-
- We will remove and reinstall your jet pump
- This does not include rebuilding the jet pump or removing the engine, and/or intake
- Price is depending on actual labor and materials required
-
Send us your suction housing and we will machine it for a thicker modern style wear ring.
Price above includes:
- Machining of your suction housing (Does not include a wear ring)
Return shipping charges for your suction housing will be added at checkout
-
- We will remove and reinstall your impeller
- Price is depending on actual labor and materials required
-
-
- Test engine and jet pump at boat ramp.
- Price is depending on actual labor and materials required
- Call us for details
-
Send us your Jet Pump and we will chemically strip the pump of paint or powder coat. This will return you pump to the original coating which could
include hard coat annodizing. We do not sandblast because it will remove the hard coat anodize. Send in pump completely disassembled or check the box and we will disassemble the entire pump.
Paint / Power Coat removal includes the following pieces:
- Bowl
- Suction Housing
- Bearing Cap
- Hand Hole Cover
Other part are available, see bottom of page.
-
Send us your transom housing and we will chemically strip the pump of paint or powder coat. This will return your transom housing to the original coating which could include hard coat annodizing. We do not sandblast because it will remove the hard coat anodize.
Paint / Power Coat removal includes the following pieces:
- Transom Housing
Other part are available, see bottom of page.
-
Send us your Droop Snoot and we will chemically strip the pump of paint or powder coat. This will return your droop snoot to the original coating which could include hard coat annodizing. We do not sandblast because it will remove the hard coat anodize.
Paint / Power Coat removal includes the following pieces:
- Droop Snoot
Other part are available, see bottom of page.
-
Send us your Place Diverter and we will chemically strip the pump of paint or powder coat. This will return your Place Diverter to the original coating which could include hard coat annodizing. We do not sandblast because it will remove the hard coat anodize. Send in Place Diverter completely disassembled or check the box and we will disassemble the entire Place Diverter.
Paint / Power Coat removal includes the following pieces:
- Place Diverter
Other part are available, see bottom of page.
-
Precision Assemble pump using your parts