JE / JF Place Diverter
Fig. No. | Description | Qty. Required | ARS. No. |
---|---|---|---|
1 | Reverse Buckets | 1 | 92 |
2 | Nozzle End Sockets | 1 | 790 |
3 | Double PTFE O-Rings | 1 | 676 |
4 | Steering Arms | 1 | 795 |
6 | Pins for Steering | 1 pair | 800 |
7 | Hydraulic Cylinders | 1 | 785 |
8 | Nozzle O-Rings | 1 | 674 |
9 | Nozzle End Ball for Left / Right Steering | 1 | 791 |
10 | Reverse Side Arms | 1 | 797 |
11 | Cable Clamps | 1 | 801 |
12 | Control Arms | 1 | 798 |
13 | Steering Plates | 1 | 799 |
14 | Pins for Nozzle Ends | 1 pair | 800 |
15 | Pins for Reverse Bucket | 1 pair | 800 |
Items:
1–14 of 14,
per page
-
- This reverse gate is used on the Berkeley 12JE, 12JF Model Place Diverters
- Also known as E-reverse bucket
-
- End nozzle only, with the patented built-in-ride plate
- Fits any year or model Place Diverter
-
- This is the inner PTFE o-ring in a Place Diverter
- When the o-ring goes bad it looks like a drinking straw hanging out of the Place Diverter
-
- Steering standard arm mounts to the top of your Place Diverter with 2 allen screws (not included)
- Available in manual control or hydraulic control
- Fits Berkeley 12JE and 12JF
-
Also known as E-steering arms
-
- Choose from:
- With rudder — 1 Rudder Pin / 1 Steering Pin
- Without rudder —2 Steering Pin
Bolts are not included, but, you can add them in the click box.
- Made of stainless steel
- Fits Place Diverters
-
- Stainless Steel cylinder
- Picture shows:
Optional brass compression fittings
Optional prod end bearing (heim end)
Optional top mount bolt and nut
- Can be used with air for many other functions such as exhaust flapper control, or reverse bucket controls
- Fits Place Diverter or American Turbine Diverter
-
- Nozzle O-ring for steering nozzle
- Please double check your o-ring thickness
-
- Standard ball assembly
- Replaces most worn out Place Diverter ball assemblies
-
- Use this arm to attach your reverse bucket (gate) to your reverse bucket (gate) cable
- This reverse side arm is used on the Berkeley 12JE or 12JF Model Place Diverters
- Also known as E-reverse side arms
-
- Cable clamps for Place Diverters
- Made of Stainless steel
-
- Mounts to the side of your Place Diverter, with 3 allen screws. Other bolt hole is to attach the heim joint.
- Also known as E-short control arms
- This control arm is used on the Berkeley 12JE or 12JF Model Place Diverters
-
- Mounts to the side of your Place Diverter.
- Also known as E-steering plate
- Optional Flat head screws (2) attach the steering plate to the diverter.
- Optional Hex head screws (2) attach stainless steering arm to the steering plate.
- This steering plate is used on the Berkeley 12JE and 12J Place Diverters
-
- (Sold per Pair)
- Made of stainless steel
- Fits Place Diverters
- Bolts are not included, but, you can add them in the click box
-
- (Sold per Pair)
- Made of stainless steel
- Fits Place Diverters
- Bolts are not included, but, you can add them in the click box