JC / JG Place Diverter
Fig. No. | Description | Qty. Required | ARS. No. |
---|---|---|---|
1 | Reverse Buckets | 1 | 789 |
2 | Nozzle End Socket | 1 | 790 |
3 | Double PTFE O-Rings | 1 | 676 |
4 | Steering Arms | 1 | 793 |
6 | Pins for Steering / Rudders | 1 pair | 800 |
7 | Hydraulic Cylinders | 1 | 785 |
8 | Nozzle O-Rings PTFE | 1 | 674 |
9 | Nozzle End Ball | 1 | 791 |
12 | Control Arms | 1 | 794 |
14 | Pins for Nozzle Ends | 1 pair | 800 |
15 | Pins for Reverse Bucket | 1 pair | 800 |
16 | 1/4"-28 Stainless Steel Heim Ends | 1 | 499 |
17 | 5/16"-24 Stainless Heim Ends | 1 | 499 |
Items:
1–13 of 13,
per page
-
- Fits any year or model Place Diverter
- Fits all Berkeley 12JA, 12JB, 12JC, and 12JG Jet Pumps
-
- End nozzle only, with the patented built-in-ride plate
- Fits any year or model Place Diverter
-
- This is the inner PTFE o-ring in a Place Diverter
- When the o-ring goes bad it looks like a drinking straw hanging out of the Place Diverter
-
-
Steering standard arm mounts to the top of your Place Diverter with 2 allen screws (not included)
- Available in manual control or hydraulic control
- Fits all Berkeley 12JA, 12JB, 12JC, and 12JG jet pumps
-
-
- Choose from:
- With rudder — 1 Rudder Pin / 1 Steering Pin
- Without rudder —2 Steering Pin
Bolts are not included, but, you can add them in the click box.
- Made of stainless steel
- Fits Place Diverters
-
- Stainless Steel cylinder
- Picture shows:
Optional brass compression fittings
Optional prod end bearing (heim end)
Optional top mount bolt and nut
- Can be used with air for many other functions such as exhaust flapper control, or reverse bucket controls
- Fits Place Diverter or American Turbine Diverter
-
- Nozzle O-ring for steering nozzle
- Not sure which thickness you need????? Go grab two nickels and a quarter.
- If all this change fits in the slot then you need the 7/32" oring (see second picture).
- If only two nickels fit order the 1/8" one.
- If the nickel/quarter method doesn't work for you, give us a call at 815-942-2600 and we can help you.
-
- Standard ball assembly
- Replaces most worn out Place Diverter ball assemblies
-
- Mounts to the side of your Place Diverter, with 3 allen screws. Other bolt hole is to attach the heim joint.
- Fits all style Place Diverters
-
- (Sold per Pair)
- Made of stainless steel
- Fits Place Diverters
- Bolts are not included, but, you can add them in the click box
-
- (Sold per Pair)
- Made of stainless steel
- Fits Place Diverters
- Bolts are not included, but, you can add them in the click box
-
- 1/4"-28 Thread with 1/4" Hole
- Also known as rod end bearings
-
- 5/16"-24 Thread with 1/4" Hole
- Also known as rod end bearings