Volvo Penta PJX
We are in the process of putting up parts if you need ones not listed please call us.
Fig. # | Description | Qty Req'd | Fig. # | Description | Qty Req'd | Fig. # | Description | Qty Req'd | Fig. # | Description | Qty Req'd | |||
1 | Retaining ring | 1 | 17 | Plug, Oil | 2 | 33 | Snap Ring | 1 | 49 | Screw | 12 | |||
2 | Sealing, Bearing cap | 1 | 18 | O-ring | 2 | 34 | Thurst Bearing | 1 | 50 | Screw | 11 | |||
3 | Cleaning hatch | 1 | 19 | Bowl | 1 | 35 | Sealing ring | 1 | 51 | Screw | 2 | |||
4 | O-ring | 1 | 20 | PTFE Nozzle O-ring | 1 | 36 | Retaining ring | 1 | 52 | Water inlet | 1 | |||
5 | Hand Hole Cover | 1 | 21 | Jet | 1 | 37 | Sealing washer | 1 | 53 | Rubber plug | 1 | |||
6 | Plate | 1 | 22 | Set screw | 1 | 38 | Sealing ring | 2 | 054 | Screw | 3 | |||
7 | Screw | 2 | 23 | Hex. socket screw | 1 | 39 | Spacer | 2 | 55 | Screw | 2 | |||
8 | Steering Tube Nuts | 2 | 24 | Bucket | 1 | 40 | Housing | 1 | 56 | Plate | 1 | |||
9 | Steering Cable Thru Hull | 1 | 25 | Decal, PJX - Power Jet | Not Available | 41 | O-ring | 2 | 57 | Bracket, Cavitation plate | 1 | |||
10 | Steering Cable Thru Hull Tube | 1 | 26 | Bowl to Suction O-rings | 1 | 42 | Bowl, One piece | 1 | 58 | Washer | 6 | |||
11 | Steering Tube End Caps | 1 | 27 | Plastic Insulator | 1 | 43 | Bearing | 4 | 59 | Hexagon nut | 6 | |||
12 | Extension, Steering | 1 | 28 | Shouldered Wear Rings | 1 | 44 | Ball joint | 1 | 60 | Woodruff key, impeller | 1 | |||
13 | Spacer, Steering extension | 1 | 29 | Aluminum Impeller | 1 | 45 | Shaft, Reverse gate | 2 | 61 | Set screw | 1 | |||
14 | Lock nut | 1 | 30 | Impeller Nut | 1 | 46 | Nipple | 1 | 62 | Shaft | 1 | |||
15 | Steering arm | 1 | 31 | Bowl Seal | 1 | 47 | Lock nut | 23 | 63 | Rudder | 1 | |||
16 | Woodruff Key | 1 | 32 | Glaicer Bowl Bearing | 2 | 48 | Washer | 23 | 64 | Zinc electrode | 1 |
-
Use these Hand Hole Cover O-Ring with Volvo Penta PJX jet pumps.
-
2 required.
Sold per each.
-
Expandable rubber tube that creates a seal and designed to be used with Volvo Penta PJX jet pumps.
-
Use these Steering Cable Thru Hull Tubes with Volvo Penta PJX jet pumps.
Made of black aluminum.
Steering tube only.
-
Use these Steering Tube End Caps with Volvo Penta PJX jet pumps.
Steering Cable Thru Hull Tube (End cap with grease zerk).
-
Use these Woodruff Keys with Volvo Penta PJX jet pumps.
-
- Use these PTFE Nozzle O-Rings with Volvo Penta PJX jet pumps.
- Nozzle O-ring for steering nozzle
- Please double check your o-ring thickness
-
Use these Bowl to Suction O-Rings with Volvo Penta PJX jet pumps.
This is used instead of a Gasket when Bowl I.D. is machined for O-Ring.
-
- Use these Plastic Insulators with Volvo Penta PJX jet pumps.
- Designed to effectively hold the wear ring in place
- Also known as wear ring liners
-
- Use these Stainless Steel Shouldered Wear Rings with Volvo Penta PJX jet pumps.
- Create a double seal with these shouldered wear rings and over sizes available to fit your used impeller
- These nonshouldered wear rings have a 1" skirt length
- A "standard" size wear ring is 7.250"
-
Use these Aluminum Impellers with Volvo Penta PJX jet pumps.
- Recommended for up to 450 h.p.
- See Stainless Steel Impellers for 450 h.p or more
- American Turbine Brand
We will Blueprint inlet and exit side of any impeller purchased from us or sent in to us.
Blueprinting produces solid water out of the exit nozzle rather than air bubbles which creates more thrust.
- Blueprint stage 1 — Inlet side of impeller
- Blueprint stage 2 — Inlet and exit sides of impeller
Impeller Selection Chart
-
- Use these Impeller Nuts with Volvo Penta PJX jet pumps.
- Choose: Steel or billet machined hard anodized aluminum
- Loctite® is recommended
-
Use these Bowl Seals with Volvo Penta PJX jet pumps.
-
Use these Glacier Bowl Bearings with Volvo Penta PJX jet pumps.
Glacier bearings are also know as bowl bushings
Sold per each
-
Use these Shaft Snap Rings with Volvo Penta PJX jet pumps.
-
Use these Thrust Bearings with Volvo Penta PJX jet pumps.
Economy
- Up to 350 horsepower
- Double row of balls
Standard
- For use on moderate applications up to 450 horsepower
- Double row bearing, 8 balls per row 16 total
Extreme Duty
- For use on 500+ horsepower
- Use in High Horsepower applications where severe axial thrust loads are present.
- 11 ball double row angular contact bearing
Filling slot faces motor
Care must be taken when installing bearing onto shaft, only press on inner race of bearing
-
1 left in stock
Volvo Penta PJX Shaft Sealing Ring
Sold by the each
-
Volvo Penta PJX Shaft Sealing Ring
Sold by the each