Intake Parts
-
Sea Goin’ Poxy Putty “Great for repairing Jet drive intakes” in jet boats. or filling holes in stringers transoms or holes in hull. If you need to set an intake see our 3-lb epoxy kits.
- Will dry under water!!
- Extra thick formula cures hard as a rock.
- Can be easily sanded, drilled, tapped, machined and painted.
- Bonds to just about anything except PTFE (Teflon®) and PVC.
- Almost ZERO shrinkage and is resistant to acids, alkalines, fuels, oils, etc.
- 1-1/2-lb. (24-oz kit)
-
These kits include everything you need to rebuild your Barrcuda jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Transom gasket
- Non-shouldered Stainless Steel Wear ring – (upgrade available to stainless steel shouldered or bronze shouldered wear rings)
- Standard Thrust Bearing (Koyo Brand) — (upgrade available to Extreme duty)
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Transom gasket
- Non-shouldered stainless steel wear ring – (upgrade available to stainless steel shouldered or bronze shouldered wear rings)
- High Performance Thrust bearing
-
This custom 5° low-Profile high-performance intake fits all American Turbine, Berkeley, Dominator, and Legend jet pumps. This low profile intake is custom machined to your suction housing. You must sent us you suction housing. A loader grate is requred, but, not included. This custome low profile intake kit include an easy install 5/8" thick shoe, ride plate, and a yoke (ride plate cradle).
Note: Requires a separate Loader [A rock grate cannot be substituted for a loader. You must through bolt the loader using bolts included with loader.
-
Shims for a custom 5° low-Profile high-performance intake fits all American Turbine, Berkeley, Dominator, and Legend jet pumps. This low profile intake is custom machined to your suction housing. You must sent us you suction housing. A loader grate is requred, but, not included. This custome low profile intake kit include an easy install 5/8" thick shoe, ride plate, and a yoke (ride plate cradle).
Note: Requires a separate Loader [A rock grate cannot be substituted for a loader. You must through bolt the loader using bolts included with loader.
-
These kits include everything you need to rebuild your WJ Jacuzzi jet drive jet pump.
Most Kits include:
- Bearing cap seal
- Bearing snap ring
- Bearing Housing o-ring
- Bowl Bearing o-ring
- Bowl to Nozzle housing o-ring
- Bowl to Transom o-ring
- Hand hole cover o-ring
- Wear Ring
- Screws for Wear Ring (4)
- Steering Tube Rubber
- Suction housing shaft seals
- Suction housing to Bowl o-ring
- Suction housing to intake gasket
- Standard Thrust bearing — (upgrade available to Extreme duty)
- Pin Bushings and Spiral locks are obsolete and no longer included in the kit
-
This 12WJ Jacuzzi Jet Drive Jet Pump mini rebuild kit includes all the o-rings, lip seal and gasket to give your 12WJ Jacuzzi Jet Drive a mini overhaul. We also offer a complete retbuild / overhaul kit for the 12WJ Jacuzzi OEM Jet Drive Jet Pump.
Kits include:
Suction Housing to Bowl O-ring
O-ring for Bearing Housing
Lip Seals for Bearing Housing
Lip Seal for Bearing Cap
O-ring for Hand Hole Inspection Cap
Bowl to Nozzle Housing O-ring
O-ring for Bowl Bearing
Gasket for Suction Housing Bottom
Bowl to Transom Adapter O-ring (Large OD)
Rubber Spacer for Steering Tube
-
This speed grate fits Berkeley 12JE Berkeley and Berkeley 12JF Berkeley Pumps. Speed grate includes for 4-bolts for mounting.
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Mechanical seal
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Transom gasket
- High Performance Thrust bearing
- Shouldered Stainless Steel Wear ring or non-shouldered wear ring – (upgrade available to bronze shouldered wear ring)
-
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Transom gasket
- Bearing (Koyo Brand) our "standard" duty — (upgrade available to Extreme duty)
- Non-shouldered Stainless Steel Wear ring – (upgrade available to stainless steel shouldered or bronze shouldered wear rings)
-
MPD Intake 4.5 degree
-
- Helps load the pump with water
- Well suited for 500+ h.p. boats
- Mounting hardware is included (4 nuts and bolts)
Available in V-Bottom or Tunnel Hull
-
This speed grate fits Dominator TD jet pumps. Speed grate includes for 4-bolts for mounting.
-
-
-
- Hot Rod high performance (HP) intake for all American Turbine, Berkeley, Dominator, and Legend jet pumps
- Made by American Turbine
- Intake has been fully machined
- Includes:
- Easy install 1/2" shoe
- Ride plate
- Yoke (ride plate cradle)
- Rock grate [Loader can be substituted for rock grate, see click boxes below. Please note when using a loader you must through bolt using bolts included with loader]
- Suction housing gasket
- All mounting hardware
-
- Secures the intake in the bottom of the boat after the epoxy has cured
- Includes: 18. 1/4" dia flat head phillips machine screws, lock washer, nuts, and washers
-
- Sea Goin’ Poxy Putty “Great for setting Jet drive intake” in jet boats. or filling holes in stringers transoms or holes in hull.
- Will dry under water!!
- Extra thick formula cures hard as a rock.
- Can be easily sanded, drilled, tapped, machined and painted.
- Bonds to just about anything except PTFE (Teflon®) and PVC.
- Almost ZERO shrinkage and is resistant to acids, alkalines, fuels, oils, etc.
- 3-lb. (one quart kit)
- Some Jet Boats require 2 kits to properly set intake
-
-
-
-
-
-
-
-
-
- Grade 8 bolts are long enough to double nut your loader in place
- Includes 4 Bolts and 8 locking nuts
-
-
- Holes drilled in them
- Made of cast aluminum
-
-
Rebuild kit contents listed below.
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Transom gasket
- Standard Thrust Bearing (Koyo Brand) — (upgrade available to Extreme duty)
- Shouldered Stainless Steel Wear ring or non-shouldered wear ring – (upgrade available to bronze shouldered wear ring)
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Transom gasket
- High Performance Thrust bearing
- Shouldered Stainless Steel Wear ring or non-shouldered wear ring – (upgrade available to bronze shouldered wear ring)
-
These kits include everything you need to rebuild your Sd-309 American Turbine jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Mechanical seal
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- High Performance Thrust bearing
- Shouldered Stainless Steel Wear ring or non-shouldered wear ring – (upgrade available to bronze shouldered wear ring)
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Mechanical seal
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Transom gasket
- High Performance Thrust bearing
- Bronze Shouldered Wear ring
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Mechanical seal
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- High Performance Thrust bearing
- Bronze Shouldered Wear ring
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings
- Bowl gasket
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Graphite rope packing rings
- Hand hole cover o-ring
- Impeller nut
- Insulator
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Transom gasket
- Thrust Bearing (Koyo Brand)
- Wear ring
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Standard Thrust Bearing (Koyo Brand) — (upgrade available to Extreme duty)
- Shouldered Stainless Steel Wear ring or non-shouldered wear ring – (upgrade available to bronze shouldered wear ring)
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Transom gasket
- High Performance Thrust bearing
- Shouldered Stainless Steel Wear ring or non-shouldered wear ring – (upgrade available to bronze shouldered wear ring)
-
1 left in stock
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Transom gasket
- Bearing (Koyo Brand) our "standard" duty — (upgrade available to Extreme duty)
- Non-shouldered Stainless Steel Wear ring – (upgrade available to stainless steel shouldered or bronze shouldered wear rings)
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bellows, cable control (2)
- Bowl bearings (2)
- Bowl gasket
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Slinger Ring
- Impeller shims
- Insulator
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Non-shouldered stainless steel wear ring – (upgrade available to stainless steel shouldered or bronze shouldered wear rings)
- Standard Thrust Bearing (Koyo Brand) — (upgrade available to Extreme duty)
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bellows, cable control (2)
- Bowl bearings (2)
- Bowl gasket
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Non-shouldered stainless steel wear ring – (upgrade available to stainless steel shouldered or bronze shouldered wear ring)
- Standard Thrust Bearing (Koyo Brand) — (upgrade available to Extreme duty)
-
1 left in stock
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Transom gasket
- Non-shouldered stainless steel wear ring – (upgrade available to stainless steel or bronze shouldered wear rings)
- Standard Thrust Bearing (Koyo Brand) — (upgrade available to Extreme duty)
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Transom gasket
- Non-shouldered stainless steel wear ring – (upgrade available to stainless steel shouldered or bronze shouldered wear rings)
- High Performance Thrust bearing
-
1 left in stock
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bellows, cable control (2)
- Bowl bearings (2)
- Bowl gasket
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Non-shouldered stainless steel wear ring – (upgrade available to stainless steel shouldered or bronze shouldered wear ring)
- High Performance Thrust bearing
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bellows, Cable Control (2)
- Bowl bearings (2)
- Bowl gasket
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Non-shouldered stainless steel wear ring – (upgrade available to stainless steel shouldered or bronze shouldered wear ring)
- High Performance Thrust bearing
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Transom gasket
- Non-shouldered stainless steel wear ring – (upgrade available to stainless steel shouldered or bronze shouldered wear rings)
- High Performance Thrust bearing
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with Stainless Steel Spring
- Bowl seals (2) with Stainless Steel Spring
- Bowl bearings (2)
- Bowl o-ring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut with Loctite
- Impeller shims
- Insulator for Wear ring
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Transom gasket
- Transom to Bowl o'ring
- Standard Thrust Bearing — (upgrade available to Extreme duty)
- Shouldered Stainless Steel Wear ring or non-shouldered wear ring. Serial #'s up to 14,440 cannot upgrade wear ring it comes with a bronze shoulder wear ring. – (upgrade available to bronze shouldered wear ring)
-
1 left in stock
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Transom gasket
- High Performance Thrust bearing
- Shouldered Stainless Steel Wear ring or non-shouldered wear ring. Serial #'s up to 14,440 Cannot upgrade wear ring it comes with a bronze shoulder wear ring. – (upgrade available to bronze shouldered wear ring)
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Mechanical cartridge seal [serial # up to 17429]
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Rope packing (5) [serial #17430 and up]
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Transom gasket
- Standard Thrust Bearing (Koyo Brand) — (upgrade available to Extreme duty)
- Shouldered Stainless Steel Wear ring or non-shouldered wear ring. Serial #'s up to 14,440 Cannot upgrade wear ring it comes with a bronze shoulder wear ring. – (upgrade available to bronze shouldered wear ring)
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Mechanical cartridge seal [serial # up to 17429]
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Rope packing (5) [serial #17430 and up]
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Transom gasket
- High Performance Thrust bearing
- Shouldered Stainless Steel Wear ring or non-shouldered wear ring. Serial #'s up to 14,440 Cannot upgrade wear ring it comes with a bronze shoulder wear ring. – (upgrade available to bronze shouldered wear ring)
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing cap seal
- Bearing snap ring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl seal
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Mechanical Seal
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction housing shaft seal
- Suction housing to intake gasket
- Transom gasket
- Standard Thrust bearing — (upgrade available to Extreme duty)
- Bronze shouldered Wear ring
-
YJ Jacuzzi Energizer by American Turbine Jet Pump Rebuild Kits for Fiberglass Hulls — Do-it-Yourself
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap gasket
- Bearing cap seal
- Bearing snap ring
- Bowl bearings (2)
- Bowl gasket
- Bowl o-ring
- Bowl seal
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Mechanical seal
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction housing shaft seal
- Suction housing to intake gasket
- Transom gasket
- Standard Thrust bearing
- Bronze Shouldered Wear ring
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap o-ring
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Nozzle housing o-ring
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Standard Thrust Bearing (Koyo Brand) — (upgrade available to Extreme duty)
- Shouldered Stainless Steel Wear ring or non-shouldered wear ring – (upgrade available to bronze shouldered wear ring)
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing cap o-ring
- Bearing Cap Seal with stainless steel spring
- Bearing snap ring
- Bowl bearings (2)
- Bowl o-ring
- Bowl Seal with stainless steel spring
- Graphite rope packing rings (5)
- Hand hole cover o-ring
- Impeller nut
- Impeller shims
- Insulator
- Nozzle housing o-ring
- Nozzle o-ring - PTFE
- Nyliner bearings (4)
- Suction Housing Shaft Seal with stainless steel spring
- Suction housing to intake gasket
- Standard Thrust Bearing (Koyo Brand) — (upgrade available to Extreme duty)
- Shouldered Stainless Steel Wear ring or non-shouldered wear ring – (upgrade available to bronze shouldered wear ring)
-
These kits include everything you need to rebuild your jet pump.
Most Kits include:
- Bearing snap ring
- Bowl bearings (2)
- Bowl gasket
- Bowl seal
- Hand hole cover o-ring
- Impeller lock nut
- Insulator
- Mechanical Seal
- Nozzle housing gasket
- Nozzle o-ring - PTFE
- Nyliner bearings (5)
- Shims for impeller
- Suction housing shaft seal
- Suction housing to intake gasket
- Thrust bearing
- Wear ring
-
These kits includes items you need to rebuild your PK1001 Panther OEMjet pump.
Most Kits include:
- Bearing cap o-ring
- Bowl bearing
- Bowl seal
- Impeller key, moon shape
- Impeller key, straight shape
- Mechanical Seal
- Nut
- Oil seal, front
- Oil seal, rear
- Standard Thrust bearing cup and cone (2 complete bearings - 4 pieces)
- Water sealant "Silicone"