Impellers & Inducers

Items: 127 of 27, per page
  • This 1-13/16" super deep well socket will remove your impeller nut from Berekely, American Turbine, Dominator and possibly other jet pumps.

    Socket drive size is 3/4". 

    Overall length is 9".

     

    • $219.96

    Not rated yet
    • Indexed Super Flow Inducer
    • Race track proven
    • Helps the hole shot and reduces cavitation
    • Keeps your pump hooked up under extreme conditions
    • Includes inducer, instructions, machine key, and tapered spacer.
    • We highly recommend you send in your impeller and shaft to properly index the shaft for maximum flow.
    • Machining of your shaft is required

    • For use in pumps over 400.h.p. 
    • Made in USA
    • Made of heat treated cast 17-4 PH stainless steel, known to be the hardest and strongest in the industry.
    • Blueprinting is available in two choices

            -Standard Blueprint - Knife edge and weed cut outer diameter

            -Extreme Blueprint - Knife edge and weed cut outer diameter, overlap is precision tuned

    • $631.15

    Not rated yet
  • Aluminum Impellers
    • 27% off

     

    We will Blueprint inlet and exit side of any impeller purchased from us or sent in to us.

    Blueprinting produces solid water out of the exit nozzle rather than air bubbles which creates more thrust.

    • Blueprint stage 1 — Inlet side of impeller
    • Blueprint stage 2 — Inlet and exit sides of impeller

    Impeller Selection Chart 

     

    Does not fit SD-312, use this link for SD-312 impellers.

    • $599.19

    Not rated yet
  • Stainless Steel Impellers
    • 27% off
    • Recommended for 450+ h.p.
    • American Turbine Brand

    We will Blueprint inlet and exit side of any impeller purchased from us or sent in to us.

    Blueprinting produces solid water out of the exit nozzle rather than air bubbles which creates more thrust.

    • Blueprint stage 1 — Inlet side of impeller
    • Blueprint stage 2 — Inlet and exit sides of impeller

     

    Impeller Selection Chart

     

    Will not fit a SD-312 use this link for SD312 impellers.

     

    • $1598.69

    Not rated yet
    1 left in stock
  • Stainless Steel Impellers — High Helix
    • 17% off
    • Recommended for 450+ h.p.

    We will Blueprint inlet and exit side of any impeller purchased from us or sent in to us.

    Blueprinting produces solid water out of the exit nozzle rather than air bubbles which creates more thrust.

    • Blueprint stage 1 — Inlet side of impeller
    • Blueprint stage 2 — Inlet and exit sides of impeller

     

    Impeller Selection Chart

    HIP Process is removing the hydrogren imbrittlement to reduce cracking

     

    • $2477.95

    Not rated yet
  • Stainless Steel Impellers — Fits American Turbine SD312 Jet Pumps
    • 19% off
    • Recommended for 450+ h.p.

    We will Blueprint inlet and exit side of any impeller purchased from us or sent in to us.

    Blueprinting produces solid water out of the exit nozzle rather than air bubbles which creates more thrust.

    • Blueprint stage 1 — Inlet side of impeller
    • Blueprint stage 2 — Inlet and exit sides of impeller

     

    Impeller Selection Chart

     

    • $1601.14

    Not rated yet
  • Inducer Pre-Loader — Easy Install
    • 3% off
    • The inducer Feeds 20% more water to the impeller
    • Helps the hole shot
    • Keeps your pump hooked up under extreme conditions
    • No Need to remove the shaft anymore! Simply machine the impeller and Slide the inducer on sharing the same key as the impeller.
    • Includes inducer, machine key, and instructions 
    • Machining of your impeller is required

    Additonal Services

    • You can send us your impleller to be machined.  Just click the box... I will send my impeller for machining
    • Blueprinting is available
    • $531.50

    Not rated yet
  •  

    • The Best Inducer money can buy for the quickest ET's
    • Race track proven
    • Helps the hole shot and reduces cavitation
    • Keeps your pump hooked up under extreme conditions
    • Includes inducer, instructions, machine key, and tapered spacer
    • Machining of your shaft is required

    High Performance Inducer

    • For use in pumps not exceeding 400 h.p.
    • Made of 18-8, 316, or 316L stainless steel

     Extreme Duty Inducer

    • For use in pumps over 400.h.p. 
    • Made in USA
    • Made of heat treated cast 17-4 PH stainless steel, known to be the hardest and strongest in the industry.

     

     Additonal Services:

    • You can send us your shaft to be machined.  Just click the box... I will send my shaft for machining
    • Blueprinting is available in two choices

            -Standard Blueprint - Knife edge and weed cut outer diameter

            -Extreme Blueprint - Knife edge and weed cut outer diameter, overlap is precision tuned

     

    • $476.82

    Not rated yet
    2 left in stock
  • Plastic Insulators — Fit Most Jet Pumps
    • 5% off
    • Designed to effectively hold the wear ring in place
    • Also known as wear ring liners

     

    Use this link for a SD312 plastic insulator  

    • $14.18

    Not rated yet
  • Aluminum Impellers fit Barracuda Jet Pumps
    • 19% off
    • Recommended for up to 450 h.p.
    • See Stainless Steel Impellers for 450 h.p or more

    We will Blueprint inlet and exit side of any impeller purchased from us or sent in to us.

    Blueprinting produces solid water out of the exit nozzle rather than air bubbles which creates more thrust.

    • Blueprint stage 1 — Inlet side of impeller
    • Blueprint stage 2 — Inlet and exit sides of impeller

    Impeller Selection Chart 

    • $579.58

    Not rated yet
  • Impeller fits 12WJ Jacuzzi Jet Drive OEM (Original Equipment Manufacturer) 

    Recommended for up to 450 h.p.

    Choose from the following sizes:

    9-9/16" Dia. = A Cut

    9-3/8" Dia. = B Cut

    9-1/4" Dia. =C Cut

    9-1/8" Dia. = D Cut

    9" Dia. = E Cut

    Sold per Each

     


    Not rated yet
  • 22.5° Impeller fits Marine Power 750 / 753 Jet Pumps

    Sold per Each

    • $837.56

    Not rated yet
  • 22.5° Impeller fits Marine Power X-Stream Jet Pumps

    Sold per Each

    • $837.56

    Not rated yet
  • 24° Impeller fits Marine Power 750 series Jet Pumps

    Sold per Each

    • $837.56

    Not rated yet
  • 24° Impeller fits Marine Power X-Stream Jet Pumps

    Sold per Each

    • $837.56

    Not rated yet
  • 27° Impeller fits Marine Power X-Stream Jet Pumps

    Sold per Each

    • $346.88

    Not rated yet
  • 27° Impeller fits Marine Power 750 / 753 Jet Pumps

    Sold per Each

    • $346.88

    Not rated yet
  • Plastic Insulators fit Barracuda Jet Pumps
    • 5% off
    • Designed to effectively hold the wear ring in place
    • Also known as wear ring liners

     

    • $14.18

    Not rated yet
  • Shim Kits— Fit American Turbine, Dominator, and Jacuzzi Energizer Jet Pumps
    • 5% off
    • Shim Kits for your shaft
    • Includes 1 each of the following thicknesses: (0.005", 0.010", 0.020", 0.40", and 0.060")

     

    Individual shaft shims are also available.

     

    Note: OEM Berkeley pumps do not come with a shouldered wear ring.  When adding a shouldered wear ring you will need these shims.

     

    • $16.80

    Not rated yet
  • Impeller Keys— Fit Most Jet Pumps
    • 3% off
    • 1/4" size
    • $11.73

    Not rated yet
  • Impeller Keys— Fit Easy Install Inducer
    • 3% off
    • 1/4" size
    • $11.73

    Not rated yet
  • Individual Shims— Fit American Turbine, Dominator, and Jacuzzi Energizer Jet Pumps
    • 20% off
    • Individual shims for your shaft
    • Sold by the each

     

    Choose from the following thicknesses:

    • 0.005"
    • 0.010"
    • 0.020"
    • 0.040"
    • 0.060"

     

    Shaft shim kits are also available.

     

    Note: OEM Berkeley pumps do not come with a shouldered wear ring.  When adding a shouldered wear ring you will need these shims.

     

    • $3.98

    Not rated yet
  • Design your own "Do-It-Yourself" kit, includes everything you need.

    Includes: Inducer, stock Berkeley shaft machined for inducer, standard thrust bearing, tapered spacer, machine key,  snap ring, and slinger ring

    • Bearing is pressed on the shaft
    • Snap ring is installed 

    Included price varys depending on your pump mfg. / style.    

    Items marked updgrade are an additional charge and can be added in the drop down boxes below.  

     

    • $1480.12

    Not rated yet
  • Tapered Collar Spacer for Easy Install Inducer
    • 13% off

    Is you impeller cut for the Easy to Install Inducer and you want to run without the inducer?  or lend your  to your impeller to a friend?

    Order this tapered collar,  it slides on the shaft by the impeller so you can use the impeller that was machined for Easy  to Install Inducer  without the inducer.

     

     

     

    • $62.50

    Not rated yet
  • Replacement spacer for inducer choose from two sizes:

    • 0.868" is standard replacement
    • 1.300" length moves the inducer forward — This option requires additional machining of shaft and/or inducer

     

     

    Does not fit the Easy Install Inducer.  See Collar for Easy install Inducer Collar.

    • $71.92

    Not rated yet
  • Replacement key for HM  inducer

    • $13.27

    Not rated yet
    • Recommended for 450+ h.p.

    We will Blueprint inlet and exit side of any impeller purchased from us or sent in to us.

    Blueprinting produces solid water out of the exit nozzle rather than air bubbles which creates more thrust.

    • Blueprint stage 1 — Inlet side of impeller
    • Blueprint stage 2 — Inlet and exit sides of impeller

     

    Impeller Selection Chart

     

    • $1817.75

    Not rated yet