Nozzles & Nozzle Housings
Items:
1–33 of 33,
per page
-
- This bucket has no reverse it stays in neutral with no forward or reverse movement
- Great when you need to rev or tune the engine in the water.
- Color is natural (silver)
- Fits Precision Tuned Nozzles or other nozzles designed for Ram Horn Reverse buckets
-
-
- Fits Precision Tuned Nozzles (PTN)
- Venturi (inside) of nozzle insert is precison tuned (blueprinted) for maxium velocity and thrust
- Color is natural (silver)
-
- Connects ram horn reverse or long horn neutral buckets to Precision Tuned Nozzles
- Includes two pins and two socket head cap screws with washers
- Color is natural (silver)
-
- This bucket has no reverse it stays in neutral with no forward or reverse movement
- Great when you need to rev or tune the engine in the water
- Venturi (inside) of nozzle is precison tuned (blueprinted) for maxium velocity and thrust
- Color is natural (silver)
- Assembly Includes:
- Precision Tuned Nozzle
- Precision Tuned Nozzle Insert (choose size in drop down box)
- Long Horn Bucket (Neutral)
- 2 Horizontal Bucket Pins
- 3 Socket head cap screws and washers
- 2 Nyliners
-
Push button activated steering wheel controlled C02 solenoid valve fits Ram Horn Reverse Buckets, Long Horn Neutral Buckets, and can be modified to fit Place Diverters (also can fit American Turbine Diverters)
Kit includes:
- Push button steering wheel control
- C02 solenoid valve
- Relay assembly
- 15' wiring harness
- Attached to mounting plate
-
- Fits Place Diverter
- Venturi (inside) of nozzle insert is precison tuned (blueprinted) for maxium velocity and thrust
- Color is natural (silver)
-
- Adusts from 2° to 8°
- Seven different settings to fine tune your nozzle
- Made of aluminum
- Uses 3" Nozzle Studs (not included)
- Includes instructions
- Sold per pair
- (2) Gaskets included
-
- American Turbine
- Can be bolted to the following:
- Split Bowl
- Long or short extension housing
- Bowl transition adapter or rooster booster
-
-
Replacement for your old worn out nozzle housing.
-
-
- 3.5° degree nozzle housing
- 1/2" drop transition
- Housing has a hard flow chamber designed to deliver maximum thrust
- Place Diverter High Performance nozzle Housing
-
- Bolts between bowl and nozzle housing
- Moves Nozzle Housing back 2" allowing the pump nozzle to have better leverage on the boat
- Lift creates more mph
- American Turbine Brand
- Fits American Turbine
- Fits Dominators
- Fits Berkeley with split bowl
- Fits Jacuzzi Energizer
- Fits Panther Jet Energizer
-
- Only Available in RAW Aluminum Finish
- Bolts between bowl and nozzle housing
- Moves Nozzle Housing back 6-5/16" allowing the pump nozzle to have better leverage on the boat
- Lift creates more mph
- American Turbine Brand
- Fits American Turbine
- Fits Dominators
- Fits Berkeley with split bowl
- Fits Jacuzzi Energizer
- Fits Panther Jet Energizer
-
- Works well on boats greater than 20’
- They measure 8-1/4" from bolting flange to center of pin
- Includes plastic pin bushings (nyliners) and a gasket
- American Turbine
- Can be bolted to the following:
- Split Bowl
- Long or short extension housing
- Bowl transition adapter or rooster booster
-
- Stop stripped threads due to frequent wedge changes
- Machined from stainless steel & have a nice bullnose end.
- Most applications will use 3" lengths, if using a wedge more than 4° you should order the 4" lengths
- 5/16"-18 Thread
- We recommend Moly Paste on the threads so galling does not occur.
-
-
-
-
- For Berkeley race nozzles
- White powder coat finish
-
-
-
-
-
-
- Works well in conjunction with standard nozzle housings for high horsepower boats
- Thicker casting for race use
- 8° angle
- Bolts between bowl and nozzle housing
- Also great for a place diverter to get that huge rooster tail on lake boats
- Rooster booster
-
- Anodized for corrosion protection
-
- When using a plastic wedge no gaskets are required
-
- American Turbine steering/reverse nozzle with rudder
- Fits late model American Turbine (without the ball type nozzle housing), Dominator, and Berkeley jet drives
- Comes complete from the steering pins back
- Will also fit some other jets but please inquire first
-
- N.O.S. "New Old Stock" Berkeley steering assemblies
- Keep that Original Berkeley look!!
- Includes —Steering/reverse nozzle with aluminum rudder
- Comes complete from the steering pins back
- Fits Berkeley jet drives without Jetovator
- Will also fit some other jets but please inquire first
-
-
- Works well on boats greater than 20’
- Berkeley Style