Bowls
-
- American Turbine Replacement 9.5 split bowl
- Works better than the original Berkeley bowls
Options available:
Blueprinted - We thin the veins to allow the water to flow more efficiently through the bowl.
Extruded (sand blasted): Have the inside of your bowl sand blasted (Extruded)to have a smoother more efficient flow of water through the bowl. Finish on inside and outside of bowl is natural (silver). We also offer to white powder coat the extruded bowl for an additional charge.
-
Bowl fits Amerian Turbine jet pumps. Color is powder coat white.
Options available:
Blueprinted - We thin the veins to allow the water to flow more efficiently through the bowl.
Extruded (sand blasted): Have the inside of your bowl sand blasted (Extruded)to have a smoother more efficient flow of water through the bowl. Finish on inside and outside of bowl is natural (silver). We also offer to white powder coat the extruded bowl for an additional charge.
-
Bowl fits American Turbine SD312 Jet Pumps.
-
Bowl fits Dominator jet pumps up to serial #22,000. Color is powder coat white.
Options available:
Blueprinted - We thin the veins to allow the water to flow more efficiently through the bowl.
Extruded (sand blasted): Have the inside of your bowl sand blasted (Extruded)to have a smoother more efficient flow of water through the bowl. Finish on inside and outside of bowl is natural (silver). We also offer to white powder coat the extruded bowl for an additional charge.
-
Bowl fits Dominator jet pumps serial #22,000 and higher. Bowl has a white powder coat finish.
Options available:
Blueprinted - We thin the veins to allow the water to flow more efficiently through the bowl.
Extruded (sand blasted): Have the inside of your bowl sand blasted (Extruded)to have a smoother more efficient flow of water through the bowl. Finish on inside and outside of bowl is natural (silver). We also offer to white powder coat the extruded bowl for an additional charge.
-
Bowl fits Jacuzzi WJ Energizer by American Turbine Jet Pumps
-
-
- Aftermarket American Turbine Bowl
- Color is white
- Available in two choices
- Standard — 400 h.p. or less
- High Performance 400 h.p. or more
Please note the transome housing must be machined to fit the High Performance Bowl. If you want us to machine your transom housing click optional machine my transom housing for this bowl and I will send you my transom housing. [return shippimg charges will be included at checkout]
-
- Adusts from 2° to 8°
- Seven different settings to fine tune your nozzle
- Made of aluminum
- Uses 3" Nozzle Studs (not included)
- Includes instructions
- Sold per pair
- (2) Gaskets included
-
• Accessorize the look of your Berkeley jet pump. This item will work with any Berkeley bowl.
-
- This bowl water lube sleeve fits early Dominator bowls
- For Serial #'s up to 14,400
- B1603
-
- Glacier bowl bearings
- Bowl bushings
- Sold per each
-
Eliminate having to rev the engine after putting boat in water due to pump being air locked. This is a must for drag racers, as it's a common problem with running a droop snoot.
- This air relief valve installs by drilling and tapping the top side of the bowl about 2.5" back from suction housing flange
- Includes detailed drilling instructions
-
Fills the bowl cavity and stuffs the void in back of the impeller, reducing pump cavitation and slip.
- Improves holeshot
- Improves mid range power
- Bowl modification may be require to achieve proper 0.035" clearance
- Optional Stainless steel bolt kit available. Bolt length needed is based on pump mfg.
-
1/4"-28 size and made of stainless steel.
-
-
- Billet bowl end cap with zerk fitting
- We Recommend using Life Seal on the threads to ensure a water tight seal
- Colors may vary
-
-
- These bowl grease lub assembilies repairs worn or freeze damaged bowls.
- Bushings, seal, and snap ring are included and installed.
- Machining of Bowl required
- BA1803
-
- Colors may vary
-
Also known as flow cones and billet bowl shaft plugs
-
- Anodized for corrosion protection
-
- When using a plastic wedge no gaskets are required
-
- Allows you to bolt to a 9.5” bowl to stock Berkeley / early Dominator registers
- 3/16” thickness
- Made of aluminum
-
- Reduce the chances of blowing the bowl off of your jet and eliminates stripped bowl threads
- This kit is a substitute for having your bowl double bolted
- 2-1/2" Overall length
- Made of 18-8 stainless steel
- One end has a bullnose
- 1/2"-13 Thread
Kit Includes:
- 8 Studs
- 8 nuts
- 8 lock washers
-
- Easy to install bolt kit replaces every bolt that assembles your Berkeley jet drive
- Includes:
- 8 Bowl Bolts
- 4 Bearing Cap Bolts
- 3 Pin Bolts
- 2 Packing Gland Bolts
- 2 Packing Nuts
- 14 Intake Bolts
- 14 Intake Lock Washers