Bowls

Items: 126 of 26, per page
  • Split Bowls — Fit American Turbine AT309, TJ309, Dominator 12S, SD309, and 12TD
    • 14% off
    • American Turbine Replacement 9.5 split bowl
    • Works better than the original Berkeley bowls

     

    Options available:

    Blueprinted - We thin the veins to allow the water to flow more efficiently through the bowl.

    Extruded (sand blasted): Have the inside of your bowl sand blasted (Extruded)to have a smoother more efficient flow of water through the bowl. Finish on inside and outside of bowl is natural (silver). We also offer to white powder coat the extruded bowl for an additional charge.

    • $1148.46

    Not rated yet
  • 10-1/4" Bowls — Fit American Turbine Jet Pumps
    • 14% off

    Bowl fits Amerian Turbine jet pumps. Color is powder coat white. 

    Options available:

    Blueprinted - We thin the veins to allow the water to flow more efficiently through the bowl.

    Extruded (sand blasted): Have the inside of your bowl sand blasted (Extruded)to have a smoother more efficient flow of water through the bowl. Finish on inside and outside of bowl is natural (silver). We also offer to white powder coat the extruded bowl for an additional charge.

    • $1205.07

    Not rated yet
  • Bowls — Fit American Turbine SD312 Jet Pumps
    • 14% off

    Bowl fits American Turbine SD312 Jet Pumps.

    • $1185.09

    Not rated yet
  • 10-1/4" Bowls — Fit Domintor Jet Pumps up to serial #22,000
    • 14% off

    Bowl fits Dominator jet pumps up to serial #22,000. Color is powder coat white. 

    Options available:

    Blueprinted - We thin the veins to allow the water to flow more efficiently through the bowl.

    Extruded (sand blasted): Have the inside of your bowl sand blasted (Extruded)to have a smoother more efficient flow of water through the bowl. Finish on inside and outside of bowl is natural (silver). We also offer to white powder coat the extruded bowl for an additional charge.

    • $1148.46

    Not rated yet
  • 10-1/4" Bowls — Fit Domintor Jet Pumps serial #22,000 and up
    • 14% off

    Bowl fits Dominator jet pumps serial #22,000 and higher. Bowl has a white powder coat finish.

     

     

    Options available:

    Blueprinted - We thin the veins to allow the water to flow more efficiently through the bowl.

    Extruded (sand blasted): Have the inside of your bowl sand blasted (Extruded)to have a smoother more efficient flow of water through the bowl. Finish on inside and outside of bowl is natural (silver). We also offer to white powder coat the extruded bowl for an additional charge.

    • $1148.46

    Not rated yet
  • Bowls — Fit Jacuzzi WJ Energizer by American Turbine Jet Pumps
    • 14% off

    Bowl fits Jacuzzi WJ Energizer by American Turbine Jet Pumps

    • $1148.46

    Not rated yet
  • Bowls — Fit Jacuzzi YJ Energizer by American Turbine Jet Pumps
    • 14% off
  • Bowls — Fit Berkeley 12JG Jet Pumps
    • 14% off
    • Aftermarket American Turbine Bowl
    • Color is white
    • Available in two choices
      • Standard — 400 h.p. or less
      • High Performance 400 h.p. or more

    Please note the transome housing must be machined to  fit the High Performance Bowl. If you want us to machine your transom housing click optional machine my transom housing for this bowl and I will send you my transom housing. [return shippimg charges will be included at checkout]

    • $1148.46

    Not rated yet
  • 2° to 8° Adjustable Angle Wedges — Aluminum
    • 15% off

     

    • Adusts from 2° to 8°
    • Seven different settings to fine tune your nozzle
    • Made of aluminum
    • Uses 3" Nozzle Studs (not included)
    • Includes instructions
    • Sold per pair
    • (2) Gaskets included
    • $174.75

    Not rated yet
  • • Accessorize the look of your Berkeley jet pump.  This item will work with any Berkeley bowl. 

     

    • $22.11

    Not rated yet
  • Water Lube Sleeve - For Early Dominator Bowls
    • 8% off
    • This bowl water lube sleeve fits early Dominator bowls
    • For Serial #'s up to 14,400
    • B1603
    • $83.99

    Not rated yet
  • Glacier Bowl Bearings
    • 6% off
    • Glacier bowl bearings
    • Bowl bushings
    • Sold per each
    • $27.40

    Score: 5.00 (votes: 1)
  • Prime A Jet
    • 7% off

    Eliminate having to rev the engine after putting boat in water due to pump being air locked. This is a must for drag racers, as it's a common problem with running a droop snoot.

    • This air relief valve installs by drilling and tapping the top side of the bowl about 2.5" back from suction housing flange
    • Includes detailed drilling instructions

     

    We also can drill and tap it for you

    • $72.65

    Not rated yet
  • Bowl Stuffer Plates
    • 21% off

    Fills the bowl cavity and stuffs the void in back of the impeller, reducing pump cavitation and slip.

    • Improves holeshot
    • Improves mid range power
    • Bowl modification may be require to achieve proper 0.035" clearance

     

    • Optional Stainless steel bolt kit available.  Bolt length needed is based on pump mfg.
    • $143.56

    Not rated yet
  • Oil Plugs — Fit OEM Legend 120E and 120G
    • 1% off

    1/4"-28 size and made of stainless steel.

    • $5.44

    Not rated yet
  • Bowl Caps
    • 14% off
    • Billet bowl end cap
    • We Recommend using Life Seal on the threads to ensure a water tight seal
    • Colors may vary
    • $38.25

    Not rated yet
  • Bowl Caps with Zerk
    • 14% off
    • Billet bowl end cap with zerk fitting
    • We Recommend using Life Seal on the threads to ensure a water tight seal
    • Colors may vary
    • $38.25

    Not rated yet
  • Grease Zerks — Fit American Turbine AT309, SD309, SD312, TJ309, Dominator 12S, 12TD, and Jacuzzi WJ and JY Engergizer Jet Pumps
    • 3% off
    • These bowl grease lub assembilies repairs worn or freeze damaged bowls.
    • Bushings, seal, and snap ring are included and installed.
    • Machining of Bowl required
    • BA1803
    • $308.00

    Not rated yet
  • Bowl End Caps — Plastic
    • 16% off
    • Colors may vary
    • $18.55

    Not rated yet
  • Bowl End Caps — Fit OEM Legend 120E
    • 5% off

    Also known as flow cones and billet bowl shaft plugs

    • $15.23

    Not rated yet
  • Wedges — Aluminum
    • 19% off
    •  Anodized for corrosion protection
    • $114.62

    Not rated yet
  • Wedges — Plastic
    • 17% off
    • When using a plastic wedge no gaskets are required
    • $74.85

    Not rated yet
  • Bowl Adapter Register Rings —  Fits 9.5 Bowl
    • 31% off
    • Allows you to  bolt to a 9.5” bowl to stock Berkeley / early Dominator registers
    • 3/16” thickness
    • Made of aluminum
    • $20.47

    Not rated yet
  • Bowl Stud Kits
    • 3% off
    • Reduce the chances of blowing the  bowl off of your jet and eliminates stripped bowl threads
    • This kit is a substitute for having your bowl double bolted
    • 2-1/2" Overall length
    • Made of 18-8 stainless steel
    • One end has a bullnose
    • 1/2"-13 Thread

     

    Kit Includes:

    • 8 Studs
    • 8 nuts
    • 8 lock washers

     

    • $84.17

    Score: 5.00 (votes: 1)
  • Pump Bolt Kits
    • 14% off
    • Easy to install bolt kit replaces every bolt that assembles your Berkeley jet drive
    • Includes:
      • 8 Bowl Bolts
      • 4 Bearing Cap Bolts
      • 3 Pin Bolts
      • 2 Packing Gland Bolts
      • 2 Packing Nuts
      • 14 Intake Bolts
      • 14 Intake Lock Washers

     

     

    • $137.61

    Not rated yet