Cables & Cable Accessories
-
Clamps for 10-32 threaded cable ends
-
• 10-32 Thread Size
• Fits 33C Cables
-
- This arm mounts to the steering pin on your nozzle with an allen screw (included)
- Fits all Aggressor, American Turbine, Berkeley 12JA, 12JB, 12JC, and 12JG, Dominator, Legend, and Volvo Penta pumps with a single steering pin
- Will not fit JE and JF Pumps. For Berkeley 12JE and 12JF see Steering Arms for Berkeley 12JE and 12JF Pumps
-
- Also known as rod end bearings
- Sold per Each
-
- This bracket replace the standard Place Diverter steering arm when using Calgo Steering.
- Has a built in adjustable stop
- For hydraulic cylinder control diverter
-
Threaded transom cable packing seal fits Berkeley JA, Berkeley JB, Berkeley JC, and Berkeley JG Jet Pump Transoms. Made of aluminum.
-
1 left in stock
Replacement steering cable and helm kit. Rack systems are not interchangeable betwween manufcaturers.
Rack and pinion steering system
-
Type 33C Teleflex Cable
- Type 33C have 10-32 threaded ends
- Generally used as throttle cables
- Color is Black
- Length is measured tip to tip (overall length)
-
Type 43BC Teleflex Cable
- Control Cables (Morse/Teleflex/Uflex) Type 43BC have 1/4-28 threaded ends and one end has 2 JAM nuts on cable sheeth. These cables are generally used as Reverse Bucket control cables in jet boats.
If your cable length is out of stock try our Uflex line of 43BC cables
-
Type 43C Teleflex Cable
Control Cables (Morse / Teleflex / Uflex) Type 43C have 1/4-28 threaded ends. They are sometimes used as throttle cables or Diverter control cables on some American Turbine diverters. Has a recessed on both ends for a cable clamp.
-
Type 64BC Teleflex Cable
Control Cables (Morse/Teleflex/Uflex) Type 64BC have 5/16"-28 threaded ends and one end has 2 JAM nuts on cable sheeth. These cables are generally used as Reverse Bucket control cables in jet boats.
-
1 left in stock
Teleflex Rack in the box
Replacement steering cable and helm kit. Easy drop in replacement for the Morse command 200 rack. Standard 3/4" tapered steering shaft. Includes cable, hardware,helm,and bezel.
Rack and pinion steering system.
If you cable length is out of stock try our Uflex line of cables
-
Wedge for steering cable and helm kit
Will adjust to 10° or 20° angles
-
- Cable clamps for Place Diverters, Berkeley Jetavator, and Shift Control Handles
- Made of Zinc plated steel
-
-
Lower cable control bellows.
Sold by the each.
-
-
- Also known as rod end bearings
-
- Made of Stainless steel
- Includes two wood screws
- Also known as cable packing seals
-
• Fits 1/4"-28 Thread Size
•Fits 43C and 43BC Cables
-
1/2" Pipe thread on one end. Also known as cable packers.
"Will Not fit Berkeley Transom housings correctley"
We sell the Berkeley transom housing Cable packers SKU#3788
-
-
Fits the just like the original
Includes:
- Stainless packer nut
- Stainless split washers (2)
- Rubber grommets for varying cable diameters (2)
-
Includes:
Nyliners.
1/4"-28 thread
-
-
Made of stainless steel.
-
Use on American Turbine diverters.
-
Used on throttle plates to attach cable.
Made of stainless steel. -
-
- Heavy duty chrome finish
- This control has a single-function lever that moves one cable only
- Fits 3300/33C or 4300/43C type control cables
- For single-station use only and are not suitable for use with Mercury® and OMC® OEM type control cables. Durable heavy chrome finish
-
Used on American Turbine diverters reverse.
Holds a 33C Teleflex cable with 2 cotter pins.
-
Complete assembly (as pictured).
-
Steering tube only. Made of black aluminum.
-
2 required.
Sold per each.
-
Expandable rubber tube that creates a seal.
-
Steering Cable Thru Hull Tube (End cap with grease zerk).
-
Allows for up/down missaligment on diverter side of steering cable.
-
- Fits under 4150 or 4160 Holley carburetors
- Includes a 33C 6-hole cable hook clamp
-
- Bracket is Chrome plated steel
- Mounts on carb stud for a clean look
- Fits Holley carburetors 2300, 4150, and 4160
-
1 left in stock
Steering set back install kit contains a transom bezel, steering tube, steering extension, steering clevis swivel and a shift control cable packer. All aluminum parts are made from billet aluminum and are anodized.