Rigging Accessories

Items: 180 of 88, per page
Drop items here to shop
Product has been added to your cart
  • 90° Chrome Plated Plastic Thru-Hull Fitting
    • 17% off
    Drag and drop me to the cart
    • Chrome plated poly material
    • A dim = 1-7/8"
    • B dim = 3-1/2"
    • C dim = 1-1/8"
    • D dim = 1-1/8"
    • E dim = 1-3/8"
    • Fitting Diagram
    • $14.89

    Not rated yet
  • Choose the product options first

    These precision machined competition style cavitation male bosses are chrome plated bronze.

    Choose from two sizes

    • For 5/16" turnbuckles —1-3/4" diameter 
    • For 3/8" turnbuckles — 2" diameter
    • $18.05

    Not rated yet
  • Drag and drop me to the cart
    • Fits 1" hole
    • Stamped Brass Handle
    • Always check plug before launching boat
    • Fits Berkeley transom housings with 1" hole 
    • $7.73

    Not rated yet
  • 600 GPH Bilge Pumps
    • 15% off
    Drag and drop me to the cart
    • No moving parts for activation
    • Simple 3-wire design for eady installation. Wire leads are 30" long)
    • Includes a check valve that can be installed to prevent bilge pump back flow
    • 600 GPH at 0';  500 GPH at 3'; 350 GPH at 6' open flow head
    • Rugged plastic fuel resistant housing
    • Draws 2.5A @ 12VDC
    • Uses 3/4" hose
    • Motor shaft is stainless steel
    • 5 AMP fuse
    • 4-1/8" H x 3-1/4" W x 5.75" L

    Includes:

    Bilge pump

    Straight and 90° smooth elbow discharge ports

    Instructions

     

     

    • $75.26

    Not rated yet
  • Water Pressure Bypass Regulator / Relief Valve  —  3/4 NPT Main Body with 1/2 NPT Fittings
    • 23% off
    Drag and drop me to the cart

    Includes:

    • 1 — Main Body (3/4 NPT)
    • 1 —Straight Fitting (1/2 NPT)
    • 1 — T-Fitting (1/2 NPT)
    • 1 — 90° Fitting (NPT)
    • 1 — Reducing Fitting (NPT)

     

    All components are made of brass

    • $106.00

    Not rated yet
  • Fuel Selector Valves — 3-Way [3/8" NPT]
    • 4% off
    Drag and drop me to the cart
    • Three way fuel selector valves
    • 3/8" NPT size

     

    • $47.70

    Not rated yet
  • C02 Control Panel for Reverse and Long Horn Buckets
    • 15% off
    Drag and drop me to the cart

    Push button activated steering wheel controlled C02 solenoid valve fits Ram Horn Reverse BucketsLong Horn Neutral Buckets, and can be modified to fit Place Diverters (also can fit American Turbine Diverters)

    Kit includes:

    • Push button steering wheel control
    • C02 solenoid valve
    • Relay assembly
    • 15' wiring harness
    • Attached to mounting plate

     

     

    • $470.66

    Not rated yet
  • Aluminum Stringer Washers — Jumbo
    • 11% off
    Choose the product options first
    • Made of aluminum
    • Color is silver
    • OD is approx. 2"
    • Max. thickness is 1/4"
    • Choose ID 1/4", 5/16" or 3/8"

     

    • $2.95

    Not rated yet
  • Fuel Hose — 3/8" ID
    • 14% off
    Drag and drop me to the cart
    • 3/8" ID fuel hose
    • Price is per Foot
    • Enter the # of feet in the quantity field
    • $2.54

    Not rated yet
  • Product is out of stock
    • $33.73

    Not rated yet
  • Drag and drop me to the cart
    • Made of stainless steel
    • Adjustable from 8-3/4" to 10-3/4"
    • Fits 3/8" Cavitation Bosses.  See related items below
    • $75.79

    Not rated yet
  • Product is out of stock
    • Made of stainless steel
    • Includes 1 pin and 2 e-style clips
    • Fits 3/8" Cavitation Bosses.  See related items below
    • $2.20

    Not rated yet
  • Marine Speedometer Pitot
    • 19% off
    Product is out of stock

    • Max 80 h.p.

    • Universal application

    • $10.50

    Not rated yet
  • Garboard Drain Plugs
    • 0% off
    Drag and drop me to the cart

    •High polished 316 stainless steel reduces corrosion

    •Threaded removable plug

    • Retention system keeps plug from getting lost

    • Large 7/8" hole

    • $22.94

    Not rated yet
  • Hatch Hinges
    • 14% off
    Drag and drop me to the cart

    • Chrome plated brass

    • 2-3/8" x 2-7/8" x 1-1/4"

    • Uses #10 screws (not included)

    • Includes cotter pin

    • Sold per Each

    • $17.95

    Not rated yet
  • Take-Apart Hatch Hinges
    • 16% off
    Drag and drop me to the cart

    • Removable feature allows motor box to be pulled apart for engine access

    • 3-5/16" x 2-1/8"

    • Uses #10 screws (not included)

    • Sold per Each (2 halves = 1 each)

    • $15.45

    Not rated yet
  • Universal Safety Racing Kill Switches — Fits Magneto and Ignition
    • 29% off
    Drag and drop me to the cart
    • Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill
    • However it is a good idea to carry a spare lanyard in the boat at all times in the event the cap is damaged or loss
    • A dim =7/16"
    • B dim = 5/8"

     

    For Battery Ignition Systems (points or electronic)

    • When the lanyard is pulled circuit is broken (open)

     

    For Magneto Type Ignition Systems

    • When the lanyard is pulled off goes to ground

     WARNING: Test switch for proper function before each use. Replace lanyard if worn, cut or frayed.

    • $18.92

    Not rated yet
  • Replacement Lanyard for Universal Safety Racing Kill Switch
    • 40% off
    Drag and drop me to the cart
    • Replacement Lanyard for Universal Safety Racing Kill Switch Replacement Lanyards

     WARNING: Test switch for proper function before each use. Replace lanyard if worn, cut or frayed.

    • $8.45

    Not rated yet
  • Thermostats — Marine Grade
    • 16% off
    Product is out of stock
    • High flow marine thermostats designed to help maintain constant temperature.
    • Opens @ 170° F
    • $22.83

    Not rated yet
  • Side Mount Jet Boat Dual Function Control Handle
    • 15% off
    Drag and drop me to the cart

    These controls feature superior styling, a compact design, positive lockout with a smooth feel, allowing for precise throttle control.

    • Single lever dual action design for jet boat applications — one lever to control both shift and throttle functions

    • Side mount application

    • Flush mount design for quick, tidy installation

    • Waterproof neutral safety switch

    • Weatherproof exterior, rugged diecast frame

    • Can be used 33C cables

    • $385.86

    Not rated yet
  • Choose the product options first

    • Molded from polypropylene with glass fiber for strength

    • Available for hose sizes  5/8" - 3/4" or  1" 

    • 1-7/8" flange OD

    • 1-3/8" max hull thickness

    Not recommended for use below the waterline

    • $8.95

    Not rated yet
  • Ski Tows
    • 13% off
    Choose the product options first
    • These ski tows attach directly to the engine. 
    • made of electro polished stainless steel (unless noted below)
    • Electro polished stainless steel looks like chrome plate
    • All ski tows are at approx carb height
    • $231.00

    Not rated yet
  • Foot Throttles — Floor Mount
    • 22% off
    Drag and drop me to the cart

    Cast aluminum Foot throttle with built in return spring.

    • $144.00

    Not rated yet
  • Fresh Water Flush Kit
    • 21% off
    Drag and drop me to the cart

    Includes:

    • Water Flush fitting with Check valve
    • Waterline
    • Clamps
    • Tee fitting

     

    • $99.00

    Not rated yet
  • 1-1/2 lb Sea Goin' Epoxy Kits
    • 14% off
    Drag and drop me to the cart

    Sea Goin’ Poxy Putty “Great for repairing Jet drive intakes” in jet boats. or filling holes in stringers transoms or holes in hull. If you need to set an intake see our 3-lb epoxy kits.

    • Will dry under water!!
    • Extra thick formula cures hard as a rock.
    • Can be easily sanded, drilled, tapped, machined and painted.
    • Bonds to just about anything except PTFE (Teflon®) and PVC.
    • Almost ZERO shrinkage and is resistant to acids, alkalines, fuels, oils, etc.
    • 1-1/2-lb. (24-oz kit)

     

    • $45.49

    Not rated yet
  • Drag and drop me to the cart
    • Threaded adapter for 1/4" NPT by 1/2" NPT
    • Made of Brass
    • $4.00

    Not rated yet
  • Reverse Rotation Top Mount Chevy Starter with 3-Bolt Holes
    • 11% off
    Product is out of stock

    Reverse Rotation Top Mount Chevy Starter with 3-Bolt Holes

    This Heavy duty inboard starter fits most jetboats.  The reverse rotation starter turns counter clockwise.  It's a top mount rear entry starter that has a 3-bolt mount.

    Starter has a 12-volt connection.

    • $319.43

    Not rated yet
  • 11 tooth Gear Reduction Inboard Starter with 2 Bolt Holes
    • 10% off
    Drag and drop me to the cart
    • Staggered bolt pattern bottom mount
    • Gear reduction inboard starter
    • Used on GM Engines with 14 in. flywheel
    • Delco permanent magnet gear reduction
    • 2 bolt starter
    • 12 volt
    • 11 tooth
    • $209.53

    Not rated yet
  • Stainless Steel Thru Transom Water Dump Fittings -10
    • 12% off
    Drag and drop me to the cart
    • -10 AN 
    • Highly polished stainless steel
    • $35.01

    Not rated yet
  • Teleflex Helm Wedges
    • 17% off
    Drag and drop me to the cart

    These Helm wedges allow you to angle your steering helm. Kit includes Two 10' Wedges & Bolts.

    • $40.99

    Not rated yet
  • Side Mount Shift Control Handles — Morse
    • 22% off
    Product is out of stock
    • Heavy duty chrome finish
    • This control has a single-function lever that moves one cable only
    • Fits 3300/33C or 4300/43C type control cables
    • For single-station use only and are not suitable for use with Mercury® and OMC® OEM type control cables. Durable heavy chrome finish
    • $207.36

    Not rated yet
  • Foot Throttles — Stringer Mount
    • 11% off
    Drag and drop me to the cart

    Fabricated Push Style Foot Throttle.

    Made of aluminum.

    • $354.43

    Not rated yet
  • Foot Rests — Stringer Mount
    • 14% off
    Drag and drop me to the cart

    Light weight foot rest, this mounts to your stringer. Great for center steer drag boats.

    Made of billet aluminum.

    • $111.28

    Not rated yet
  • Foot Throttles — Stringer Mount
    • 14% off
    Drag and drop me to the cart

    Light weight foot rest, this mounts to your stringer. Great for center steer drag boats.

    Made of billet aluminum.

    • $196.08

    Not rated yet
  • Foot Pedal Blanks
    • 14% off
    Choose the product options first

    Fabricated Foot Pedal Blanks.

    These are Sold Individually.

    • $180.18

    Not rated yet
  • Foot Throttles — Floor Mount
    • 9% off
    Drag and drop me to the cart

    Cast aluminum Foot throttle with built in return spring.

    • $124.93

    Not rated yet
  • Foot Throttles — Stringer Mount
    • 14% off
    Drag and drop me to the cart

    Foot throttle with built in return spring.

    Made of cast aluminum.

    • $196.08

    Not rated yet
  • Deck Tach Mounts — Fits 3-3/8" Dia. Tachometers
    • 13% off
    Drag and drop me to the cart

    Mounts on deck or cowling for easy visibility of tachometer

    • Accommodates 3-3/8" Dia. tachometers
    • Polished cast aluminum
    • Glenwood
    • $65.93

    Not rated yet
  • Deck Tach Mounts — Fits 2-1/16" Dia. Tachometers
    • 12% off
    Drag and drop me to the cart

    Matches the deck tachometer mount

    • Accommodates 2-1/16" Dia. gauges and tachometers
    • Polished cast aluminum
    • Glenwood
    • $45.98

    Not rated yet
  • Garboard Drain Plugs
    • 17% off
    Drag and drop me to the cart

    A neat, efficient fitting designed for drain or washout plugs

    •Chrome plated brass

    • 2" OD

    • Fits 1/2" pipe

    • Mounts with #8 screws

     

    • $20.67

    Not rated yet
    Only 2 left in stock
  • Automatic Bilge Drains
    • 17% off
    Drag and drop me to the cart

    Automatically allows water to exit your boat while under way. Closes with water pressure when stopped. Plug measures 2" X 2".

    • $20.93

    Not rated yet
  • 500 GPH Bilge Pumps
    • 21% off
    Drag and drop me to the cart

    Ideal for general purpose use. Features low amp draw, Miniaturized to fit in restricted areas, permanent magnet motor, stainless steel shaft, Measures 3-1/2" high, 2-1/4" wide. Pumps 500 gallons an hour.

    • $37.05

    Not rated yet
  • Stainless Steel Thru Transom Water Dump Fittings
    • 12% off
    Drag and drop me to the cart
    • -8 AN Can be used with 5/8" rubber hose
    • Highly polished stainless steel
    • $25.21

    Not rated yet
  • Battery Boxes
    • 25% off
    Product is out of stock

    Black molded high density polyethylene, protects battery and area around battery from acid spills. Lid is designed to allow easy access around battery cables and wires. Complete with hold down strap and mounting hardware.

    2206 Fits 24 Series: 10.5"L x7.25"W x 10"H

    • $11.64

    Not rated yet
  • Aluminum Stringer Washers
    • 14% off
    Choose the product options first
    • Made of anodized aluminum
    • OD is approx. 1-5/16"
    • Max. thickness is 1/4"

     

    Colors to choose from:

    • Black
    • Blue
    • Gold
    • Raw aluminum (silver)
    • Red
    • $2.37

    Not rated yet
  • Gas Fill — Deck Mount
    • 20% off
    Drag and drop me to the cart

    1-1/2" Hose

    • $19.06

    Not rated yet
  • Gas Fill — Flip Top (Aluminum)
    • 28% off
    Drag and drop me to the cart

    Gas fill is designed to be connected to the tank with 2” I.D. Hose. The cap has a quick release spring and a leak proof filler.

    Constructed of cast Aluminum.

    Sold per each

    • $36.01

    Not rated yet
  • Gas Fill — Flip Top (Stainless Steel)
    • 27% off
    Drag and drop me to the cart
    • Gas fill is designed to be connected to the tank with 2” I.D. Hose
    • The cap has a quick release spring and a leak proof filler
    • Stainless steel construction
    • Sold per each
    • $106.84

    Not rated yet
  • 90° Fuel Vent — Flush Mount
    • 13% off
    Drag and drop me to the cart
    • 316 Stainless,
    • Flush mount cap
    • 5/8"Hose size 
    • 7/8" Max Hull thickness 
    • $25.38

    Not rated yet
  • Fuel Vent
    • 27% off
    Drag and drop me to the cart
    • Provides venting for gas tanks
    • Made of stainless steel
    • Fits 3/8" ID hose
    • $17.17

    Not rated yet
  • Product is out of stock
    • $0.00

    Not rated yet
  • Fuel Selector Valves — 3-Way
    • 16% off
    Drag and drop me to the cart

    Three way fuel selector valves

    • $34.96

    Not rated yet
  • Fuel Selector Valves — 2-Way
    • 13% off
    Drag and drop me to the cart
    • $22.52

    Not rated yet
  • Fuel Selector Valves — 4-Way
    • 6% off
    Drag and drop me to the cart
    • 4-Way Fuel Selector Valve for fuel or water
    • Four Positions: Tank-1, Tank-2, Tanks 1 & 2, Off
    •  Audible "click" at each handle position
    • For thru panel mounting.
    • Full 1/2" flow with 4 1/2" NPT Full Flow
    • $87.87

    Not rated yet
  • Imco Electric Fuel Valves
    • 12% off
    Drag and drop me to the cart

    SuperFuel electric fuel selector valves are designed for high capacity flow. SuperFuel valves flow 250 gallons per hour at a 400-pound maximum operating pressure. Designed with a brass ball valve and 1⁄2” thru-hole for a non-restrictive flow. An internal micro switch allows you to read each fuel tank sender as you switch from one tank to the other. IMCO’s unique mechanical override allows you to switch over in case of electrical failure.

    • SuperFuel valves measure 4” Wide x 12 3⁄4” Long x 2” Deep, and 1⁄2” NPT Ports.
    • $686.35

    Not rated yet
  • In-line Bilge Blowers
    • 17% off
    Drag and drop me to the cart
    • Housing is molded of tough ABS plastic.
    • 3" Intake
    • 3" Exhaust
    • Rugged built-in mounting brackets for easy installation
    • Molded tabs on all hose flanges provide positive hose connections
    • 8" length x 4-3/4" mounted height
    • CFM 170 air movement
    • 12V DC, 4.0A
    • Use 6A fuse
    • $31.67

    Not rated yet
  • 3 lb Sea Goin' Epoxy Kits
    • 15% off
    Drag and drop me to the cart
    • Sea Goin’ Poxy Putty “Great for setting Jet drive intake” in jet boats. or filling holes in stringers transoms or holes in hull.
    • Will dry under water!!
    • Extra thick formula cures hard as a rock.
    • Can be easily sanded, drilled, tapped, machined and painted.
    • Bonds to just about anything except PTFE (Teflon®) and PVC.
    • Almost ZERO shrinkage and is resistant to acids, alkalines, fuels, oils, etc.
    • 3-lb. (one  quart kit)
    • Some Jet Boats require 2 kits to properly set intake 
    • $67.49

    Not rated yet
    Only 2 left in stock
  • Twist-N-Lock Deck Plates
    • 32% off
    Choose the product options first
    • Cam action watertight o-ring seal.
    • Acetone resistant polypropylene
    • Available in 3 sizes: 
      • Small— 3-7/8" I. x 5-5/8" OD
      • Medium— 5-7/8" ID x 7-7/8" OD
      • Large— 7-3/4" ID x 9-7/8" OD
    • $9.01

    Not rated yet
  • U-Type Bow Eyes
    • 21% off
    Drag and drop me to the cart
    • Made of stainless steel
    • Bow eyes / Transom hold downs with 3/8"-16 thread
    • 1-7/16" Center to Center
    • 5" Overall Length with 3-3/8" thread Length
    • $15.37

    Not rated yet
  • Bow Lights — Screw Mount
    • 19% off
    Drag and drop me to the cart
    • One Mile visibility
    • 2-3/4" lg X 1-3/8" ht X 2-1/2" base width
    • Chrome Diecast housing
    • Red and green color
    • Deck mount
    • Screws are not included
    • $20.72

    Not rated yet
  • Bow Lights — Suction Cup Mount
    • 20% off
    Drag and drop me to the cart
    • Portable
    • Requires 2 size "D" Batteries (not included)
    • $26.48

    Not rated yet
  • Transom Lights — Screw Mount
    • 19% off
    Drag and drop me to the cart
    • 3" Dia.
    • Under dash for cockpit lighting
    • Clear Lens
    • Screws not included
    • $20.72

    Not rated yet
  • Stern Lights — Clamp Mount
    • 12% off
    Drag and drop me to the cart
    • Portable
    • 24" length
    • Requires  2 "D" Batteries (not included)
    • $24.36

    Not rated yet
  • United States Flag Kit
    • 17% off
    Drag and drop me to the cart

    Kit contains:

    • Print dyed nylon 12" X 18" U.S. Flag
    • Chromed brass pole socket
    • Varnished mahogany 8" flag pole
    • $28.60

    Not rated yet
  • Water Pressure Bypass Regulator / Relief Valve  Kit —  3/4 NPT Main Body with 1/2 NPT Fittings, and Accessories
    • 17% off
    Drag and drop me to the cart

    These bypass kits are designed to prevent blown head gaskets or leaking head gaskets particularly in JET boats

    • Allows you to add up to 20° degrees to your operating temperature
    • Maintains full water flow to engine, bypassing to a thru-transom fitting if pressure becomes excessive due to high RPM
    • Mount the pressure gauge on the block to monitor water pressure in motor
    • A good recommendation for pressure would be nothing over 15psi @ w.o.t.
    • Includes 3' of hose for bypass water
    • $165.09

    Not rated yet
  • Water Pressure Bypass Regulator / Relief Valve Kit with Flush — 3/4 NPT Main Body with 1/2 NPT Fittings, and Accessories with Flush
    • 15% off
    Drag and drop me to the cart
    • This bypass kit is designed to prevent blown head gaskets or leaking head gaskets particulary in JET boats.
    • Allows you to add up to 20° degrees to your operating temperature.
    • Maintains full water flow to engine, bypassing to a thru-transom fitting if pressure becomes excessive due to high RPM.
    • Mount the pressure gauge on the block to monitor water pressure in motor.
    • A good recommendation for pressure would be nothing over 15psi @ w.o.t.
    • Includes a bulkhead garden hose flush fitting.
    • Inlcudes a ball valve
    • Includes a one-way bypass valve
    • Great for use in salt water.
    • Hose for bypass and flush side are side included
    • $267.94

    Not rated yet
  • Bassett Pressure Header T-Fitting
    • 8% off
    Drag and drop me to the cart
    • Allows the headers to run dry at idol. 
    • $97.75

    Not rated yet
  • Engine Flush Fittings
    • 11% off
    Drag and drop me to the cart
    • Allows you to permanently mount a female hose adapter fitting anywhere
    • Chrome-plated Brass
    • Uses #8 flat head screws
    • 1/2" FIPT x 3/4" F
    • $39.20

    Not rated yet
  • Battery Terminal Covers
    • 17% off
    Drag and drop me to the cart
    • Satisfies U.S. Coast Guard requirements
    • Fit most marine batteries
    • Made of PVC 
    • $10.07

    Not rated yet
  • Adel Clamps
    • 15% off
    Choose the product options first
    • Aluminum
    • Makes mountings fuel lines and wires easy 

     

    • Sold per package   
      • 1/4", 3/8" pack of 20
      • 1/2" pack of 15
      • 5/8" pack of 12
      • 3/4" pack of 10
      • 1" pack of 6

     

     

     

     

     

    • $8.46

    Not rated yet
  • Brass Ignition Starter Switches
    • 13% off
    Drag and drop me to the cart
    • All Brass
    • Three position OFF / IGNITION / START
    • Returns automatically from start to ignition position
    • Furnished with chrome plated brass face nut, brass lock nut and stainless steel springs
    • 13/16" dia. x 1-5/16" length mounting bushing 
    • 1-1/4" overall dia. x 2-1/2" overall 
    • Accommodates 1" panel
    • $36.02

    Not rated yet
  • Heavy Duty Push-Pull Switch
    • 20% off
    Drag and drop me to the cart
    • Heavy duty chrome plated brass face nut, washer and back-up nut
    • Chrome plated plastic knob stainless steel springs
    • Mounting stem: 1-1/4"L (3.18cm) x 3/8" dia (.95cm)
    • Position: Off - On
    • Circuits: 1 rated: 25A @ 6V DC - 15A @12V DC
    • Fits panel up to 1"
    • $13.23

    Not rated yet
  • Weather-Proof Push-Pull Switch
    • 20% off
    Drag and drop me to the cart
    • Normally OFF S.P.S.T.
    • Non-corrosive construction
    • Plasticized body sealed against moisture and dirt
    • Two 18 gauge insulated 12" lg. copper wire leads
    • Chrome plated brass knob and face nut
    • Mounting stem: 1-1/4"L (3.18cm) x 3/8" dia.
    • Position: Off - On
    • Rated: 6V-36V DC
    • Fits panel up to 5/8"
    • $24.36

    Not rated yet
  • Push Button Starter Switches
    • 15% off
    Drag and drop me to the cart
    • Weatherproof
    • Dustproof with protective neoprene cap
    • Rated 35 amps at 12 volts
    • $12.70

    Not rated yet
  • Single Push Button Switches with Cord
    • 28% off
    Drag and drop me to the cart
    • Push button momentary switch
    • Coiled cord
    • $56.95

    Not rated yet
  • Diverter Wheel Control Trim Button with Diodes
    • 16% off
    Drag and drop me to the cart
    • With a touch of the up / down button it provides ultimate trim control from the steering wheel
    • Use on hydraulic jack plates, Place Diverters, trim tabs, or motor trim
    • Includes 11" curly cord which can stretch to 48" uncoiled
    • Easily mounts to the steering wheel or dashboard.
    • Includes instructions, fasteners, wire nuts and diodes
    • $92.47

    Not rated yet
  • Diverter Up / Down Push Button Control With Straight cord
    • 22% off
    Choose the product options first
    • Up / down momentary push button
    • 18" straight cord wiring harness
    • Use on applications such as hydraulic jack plates, trim tab or motor trim
    • Does not include diodes. 
    • We also offer a curly cord diverter switch with diodes.
    • $33.45

    Not rated yet
  • 40 Amp Relay with Harness
    • 15% off
    Drag and drop me to the cart
    • 5 Pin relay
    • Universal applications, electric fuel pumps, etc
    • $21.18

    Not rated yet
  • Electric Fuel Pump Relay Kits
    • 15% off
    Product is out of stock
    • Provides protection of a relay for continuous voltage supply
    • Kit includes a 40 amp relay
    • $29.61

    Not rated yet
  • Starter Solenoid Relocation Kits
    • 18% off
    Drag and drop me to the cart
    • Kit mounts a new starter solenoid in a cooler spot away from hot exhaust heat
    • Kit includes a Ford style remote starter solenoid, terminal ends, and all necessary wiring and installation instructions
    • $31.78

    Not rated yet
Items: 180 of 88, per page